WASSERSTEIN NestDB2VerMtBlkUSA Vertical Adjustable Angle Mount User Manual
- June 8, 2024
- WASSERSTEIN
Table of Contents
NestDB2VerMtBlkUSA Vertical Adjustable Angle Mount
User Manual
Package Includes
- 1 x Vertical Angle Mount
- 1 x Wall Plate
- 3 x Long Screws for Wall Mount
- 3 x Wall Anchors for Wall Mount
- 3 x Short Screws to install the Doorbell Backplate
- 3 x Silicone Rings for Wall Mount
- 1 x User Manual
Pre-Installation
- We recommend that you use a magnetic screwdriver to easily screw in the screws.
Installation
-
Take down the Nest Doorbell if you have previously installed it on your wall.
-
Attach the Vertical Angle Mount’s Wall Plate to the wall using the long screws and wall anchors provided for mounting. The drill bit size is 1/8″. Use the silicone rings if you have an uneven surface before mounting. Place the silicone rings underneath the mount when mounting.
If your doorbell is hardwired: Make sure that the wires of the doorbell come out through the opening as shown below. -
Attach the Vertical Angle Mount onto its wall plate. When attaching the Vertical Angle Mount, ensure that the clasps inside of these two plates are aligned and push hard until you hear a “click” sound. Note:
If you want to adjust your doorbell facing upwards after the installation, just turn the Vertical Angle Mount upside down before attaching it to its wall plate. You can detach the Vertical Angle Mount from its wall plate by using a sharp object such as a knife or a pin. -
Screw in the doorbell backplate onto the Vertical Angle Mount using the short screws.
-
Attach the doorbell onto the Vertical Angle Mount. If your doorbell is hardwired: Connect the wires to the doorbell as shown.
-
Choose your desired angle and tighten the tiny screws on the left and right sides of the mount.
Get More Support
Scan the QR code below or, email us at contact@wasserstein- home.com
The Wasserstein Vertical Adjustable Angle Mount has been certified by
Wasserstein to meet Google’s compatibility standards. Google is not
responsible for the operation of this product or its compliance with any
applicable safety or other requirements.
Learn more at g.co/madeforgoogle.
Google’s “made for” badge, Google Nest Doorbell (battery), and related marks
are trademarks of Google LLC.
Google Nest Doorbell (battery) is not included.
Wasserstein is not affiliated with Google LLC.
Wasserstein is a trademark of Dropcases Ltd.
Google Nest Doorbell (battery) is a trademark of Google LLC.
For more information, please visit:
www.wasserstein-home.com
Made in China
Documents / Resources
|
WASSERSTEIN NestDB2VerMtBlkUSA Vertical Adjustable Angle
Mount
[pdf] User Manual
NestDB2VerMtBlkUSA, Vertical Adjustable Angle Mount, Adjustable Angle Mount,
Vertical Angle Mount, Angle Mount, Mount
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>