ACCORD LIGHTING 591 Ceiling Mounted LED Instruction Manual
- June 8, 2024
- ACCORD LIGHTING
Table of Contents
ACCORD LIGHTING 591 Ceiling Mounted LED
Line: Clean
Family: Ceiling
Description: Clean Accord Ceiling Mounted 591
Material: Natural Wood Veneer MDF and Acrylic
Weight:
MAKING ELECTRICAL CONNECTIONS
- Align and mark on ceiling the positions of holes using the base as drilling template. Make the holes with a 8mm drill and install the provided plastic bushing.
- Insert electrical cable through the crossbar.
- Connect the electrical supply wires to the junction box in accordance to all applicable local codes, as shown in the diagram.
- After electrical connections are made, place excess wire inside of the junction box.
MOUNTING ON THE FIXTURE
- Attach the support base to the ceiling using the supplied screws into the installed plastic wall plugs.
- Fix the Luminaire using the supplied screw. Turn ON electrical power.
Your luminaire is now ready for use.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY. Its recommended to read these instructions completely and
carefully before proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service.
The responsibility of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual. The manufacturer is not responsible for any damage to the product
caused by accidents, alterations of any kind, improper usage or improper
installation. See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications
contained in this manual without prior notice, in accordance with its policy
of continuous product improvement. Please, contact the manufacturer if
additional information is necessary. The illustrations in this manual are for
guidance only and may vary in scale, dimensions and model details.
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available
mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED. Do not alter, relocate or
remove any electrical component.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>