Hisense K610 Series 3D LED TV User Guide
- June 13, 2024
- Hisense
Table of Contents
Hisense K610 Series 3D LED TV User Guide
K610 Series
QUICK SETUP GUIDE
ACCESSORIES LIST
- User Manual
- Quick Setup Guide
- Warranty Card
- Remote Control
- Batteries: AAA × 2
- 3D Glasses × 1
For HL50K610PZLN3D: • Screw (M4×L12) × 6 • Screw (ST4×L14) × 2 • Screw (M5×L12) × 4
For HL55K610PZLN3D: • Screw (M5×L12) × 10 • Screw (ST4×L14) × 2
- If the item is not specif ied in the accessories list, it should be provided by customer.
- Recommend the active shutter 3D glasses model FPS3D07A. Other brands 3D glasses may not be supported.
INSTALLING THE STAND
Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the TV or scratching to the screen.
Product image is only for reference, actual product may vary in appearance.
SECURING THE INSTALLATION SPACE
Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 41°F (5°C).
Install with stand
Never install the TV set as follows:
Inadequate air circulation can lead to overheating of the TV and may cause damage to your TV or cause a fire.
VIEWING THE REMOTE CONTROL
CHANGE THE BATTERIES
- Slide open the battery cover on the back of the remote control.
- Install two AAA size (1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs on the battery compartment.
- Close the battery cover.
- Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire.
- Do not mix battery types or combine used batteries with new ones.
- Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
- If you do not intend to use the remote control for a long time, remove the batteries.
- The effective range of remote control is suggested in the figure below.
REMOTE CONTROL RANGE
- The maximum distance is 8 meters in front of the TV set.
- The remote control is effective within 30 Degrees of horizontal angle, or 15 Degrees of vertical angle at maximum distances of 6 meters.
MAKING CONNECTIONS
Check the jacks’ for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure.
ANT Connect an outdoor VHF/UHF antenna.
LAN Connect an ethernet cable to access a network or the Internet.
Turning the TV On for the First Time
The Installation Guide Menu appears the first time you turn on the TV. It will assist you to specify the Language Setting, Country Setting, Time Zone Setting (just for Australia area), Use Mode, Network Setting and Channel Search.
- Press [POWER] to turn on your TV, it will go straight into Setup Wizard menu
- Press [▲/▼/◄/►] buttons to navigate the menu and change the settings. Press [OK] button to confirm.
Language Setting – Select your desired language to be displayed on the menu.
Country Setting – Select the country where you will operate the TV.
Time Zone Setting – Select the local time zone according to your region.
Use Mode – Select your Mode Setting: Home Mode or Shop Mode. Home Mode is the recommended setting which offers full functionality of the television.
Network Setting – Connect an Ethernet cable to access a network or the Internet. TV also features wireless connectivity. For more information, see “Using the Network Menu”.
Channel Search – Search and store all available TV channels automatically.
HDMI / COMP / AV
Connect an HDMI cable or Comp/AV Adapter from an external A/V equipment. No sound connection is needed for HDMI to HDMI connection. If the device signal resolution does not match the specification table you need to change the setting of device according to the table. Please consult your device user manual for instruction.
- To select the HDMI / Component / AV
Press [Source] button, when the list of Input Source appears, press [▲/▼] to select the source [HDMI] / [Component] / [AV], then press [OK] to connect.
VGA & AUDIO
Connect a VGA cable and an audio cable from the PC.
- To select the VGA: Press [Source] button, when the list of In Source appears, press [▲/▼] to select the source [VGA], then press [OK] to connect.
USB
Connect a USB 2.0 device port for browsing photos, listening music and watching recorded movies.
- To select the USB device: Press [Source] button, when the list of Input Source appears, press [▲/▼] to select the source [HiMedia], then press [OK] to connect. Or press [HiMedia] to directly enter the HiMedia menu
DIGITAL AUDIO OUT
Connect an optical cable from an external digital audio system (Toslink optical cable is needed).
HEADPHONE Connect Headphone for audio out of the TV.
SPECIFICATIONS
Features, appearance and specifications are subject to change without notice.
If you encountered difficulty when setting up your TV, we suggest you refer to the Trouble Shooting tips in the User Manual.
Documents / Resources
|
Hisense K610 Series 3D LED
TV
[pdf] User Guide
K610 Series, K610 Series 3D LED TV, 3D LED TV, LED TV, TV
---|---