DiO 54846 Mini Waterproof Remote Controlled Plug User Manual
- June 8, 2024
- DiO
Table of Contents
DiO 54846 Mini Waterproof Remote Controlled Plug
BOX CONTENTS
Video tutorial
In order to simplify the understanding and installation of our packages and
solutions, we
have opted for filmed instructions: you can watch them on our YouTube
channel.com/c/-dioconnected-home,
in the playlists tab.
Install the plug
Plug your lamp or appliance into the DiO socket, and the DiO socket into your wall plug. Turn the power switch on the device to the on position.
Connect the socket to a DiO 1.0 control
This product is compatible with all DiO 1.0 controls: remote control switches, wireless sensors and the DiO home automation system for control via your smartphone.
Associate the outlet with a remote control, switch or sensor
- Connect your DiO outlet with the lamp plugged into the wall socket.
- Move the remote control (or switch, DiO sensor) to the outlet and within 6 seconds press
the ‘ON’ button on the remote control, wireless switch or DiO sensor, the lamp will flash twice to confirm the association.
Caution: If you do not press the ON button on your control within 6
seconds, the DiO outlet will exit learning mode; you must remove the mini
outlet from the power supply and replace it.
The socket can be linked to up to 32 different DiO controls.
Linking the outlet to the D10 control panel
Link your outlet to your DiO central unit, to control your lighting with your
smartphone and
create scenarios, for example to turn on/off your lamp at a specific time orto
simulate a presence during your absence. Refer to your control panel’s manual
to add an outlet. By using the DiO Home+ control panel, you make your outlet
compatible with smart speakers (Google Home and Amazon Alexa), so you can
control your devices by voice.
Delete a command
- Bring the control close to the outlet and press the learning button for 3 seconds, the LED will start to blink slowly.
- Press the ‘OFF’ button of the control to be deleted, the lamp will blink twice to confirm the deletion.
Troubleshooting
The light or device does not turn on:
– Check that your outlet is properly connected to the power supply.
– Check the polarity and/or the exhaustion of the batteries of your control. –
Check that the switch on your light or appliance is in the on position.
Important: A minimum distance of 1-2m is required between two DiO
receivers (module and/or socket). The range between the outlet and the DiO
control may be reduced by thick walls, or an existing wireless environment.
Caution: Do not use in a damp area.
Technical Specifications
Protocol: DiO 1.0
Frequency: 433.92 MHz
Transmission range: 50m (in free field) Max. 32 associated transmitters
Operating temperature: Oto 40°C
Power supply: 230 V ~ 50Hz
Max: 3500W resistive load
d x h : 53 x 70 mm
**Complete your installation
**
Complete your installation with DiO solutions to control your heating, your
lighting, your roller shutters, your garden or to visualize what is happening
at home with video
surveillance. Easy, qualitative, scalable and economical, discover all DiO
connected home solutions on www.chacon.com
****Electronic on/off micro-switch.
**** Alternating current
**** Protective earth
Recycling In accordance with the European directives WEEE (2002/96/EC) and on batteries (2006/66/EC), all electrical, electronic and battery devices must be collected separately by a local and specialized waste collection system. Do not dispose of these products with ordinary waste. Consult the applicable regulations. The mark in the shape of a dustbin indicates that this product must not be disposed of with household waste in any EU country. To prevent any risk to the environment or human health from uncontrolled disposal, recycle the product responsibly to promote the sustainable use of material resources. To return your used device, use the return and collection systems or contact the original dealer. He will take care of the recycling in accordance with the regulations.
CHACON declares that the device 54846 is in compliance with the essential requirements and other relevant provisions of the RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following web address: www.chacon.com/conformity
Support
www.chacon.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>