INTELLINET 561761 24-Port Gigabit Ethernet PoE+ Switch Instructions

June 8, 2024
INTELLINET

INTELLINET logo 24-Port Gigabit Ethernet PoE+ Switch with Four 10G SFP+ Ports Instructions
Model 561761 (I P S – 2 8 G 0 4 – 10 G – 370 W )
Important: Read before use.
InstructionsINTELLINET 561761 24-Port Gigabit Ethernet PoE+ Switch
-

561761 24-Port Gigabit Ethernet PoE+ Switch

For additional benefits: Scan to register your product warranty or go to:

https://register.intellinet-network.com/r/561761

This guide presents the basic steps to set up and operate this device.
For specifications, visit intellinetnetwork.com. Register your product at register.intellinet-network.com/r/561761 or scan the QR code on the cover.

Placement

Prior to use, it is recommended that the switch be placed/positioned:

  • on a level surface that can support the weight of the switch (and any other items that need to be considered);
  • with a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate ventilation;
  • away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
  • where it cannot be affected by excessive moisture.

The switch includes brackets and screws for optional rack mounting.

  1. Disconnect any cables from the switch.
  2. Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
  3. Repeat Step 2 on the other side of the switch.
  4. Position the switch in the rack and screw the brackets to the rack.
  5. Reconnect any cables.

Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal connector is used to provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis grounding screw, it should be wired to an object that provides earth ground. In rackmount installations, grounding is typically provided by the metal frame of the mounting rack.

Connections

  • All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc. Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
  • Use the included power cable to connect the receptacle on the back of the switch to a power outlet, and confirm that the PWR LED lights.
  • The LED indicators make it easier to monitor the switch and its connections.

NOTE: All RJ45 ports provide power to a connected device, and all connected devices should comply with IEEE 802.3af/at.

INTELLINET 561761 24-Port Gigabit Ethernet PoE+ Switch -
connected

No LED Color Status Description
1 PWR Green On Unit is receiving power.
Off Check connection.
2 SYS Green Blinking System is normal.
Off System not started.
3 Link / ACT / Speed
1 – 24 10/100M: Orange;
1000M: Green On Valid port connection.
Blinking Data transmitted/received.
Off No link established.
4 PoE 1 – 24 Yellow On The connected device is receiving power.
Blinking Abnormal power supply at the port.
Off No PD device is linked.
5 25S – 28S 1G: Orange;
10G: Green On Valid port connection.
Blinking Data transmitted/received.
Off No link established.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate Collection Systems)

**** This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.

WARRANTY AT:intellinetnetwork.com

REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manuafacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.

This device complies with the requirements of CE 2014/30/EU and / or 2014/35/EU. The Declaration of Conformity for is available at:
support.intellinet-network.com/barcode/561761

INTELLINET 561761 24-Port Gigabit Ethernet PoE+ Switch -
icon3

North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677 USA| Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan| Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany
---|---|---

All trademarks and trade names are the property of their respective owners.

INTELLINET logointellinetnetwork.com
All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved.
Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.
**** Printed on recycled paper.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

INTELLINET User Manuals

Related Manuals