D-Link N300 4G Smart Router User Guide
- June 8, 2024
- D-Link
Table of Contents
D-Link N300 4G Smart Router
Quick Installation Guide
G403
N300 4G Smart Router
IN THE BOX
HOW TO SET
DOWNLOAD APP
Option 1
WIFE CONNETIONS
Option 2
CONNECTIONS WITH PC
Option 3
FAQ
-
Why can’t I access the web-based configuration utility?
Verify that http://XXXX.devicesetup.net/ has been correctly entered into the browser (XXXX represents the last 4 characters of the MAC address). The Wi-Fi Name(SSID), Wi-Fi Password, and device password are printed on the device label on the bottom of your device. -
Why can’t I access the Internet?
Power cycle your router and check your Internet access again. If you still can not connect to the Internet, contact your Internet service provider. -
What do I do if I forgot my device password or my Wi-Fi Password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults. -
How do I restore the router to its factory default settings?
Locate the reset button. With the router powered on, use a paper clip to hold the button down until the LED turns solid red. Release the button and the router will go through its reboot process.
GPL Code Statement
This D-Link product includes software code developed by third parties,
including software code subject to the GNU General Public License (“GPL”) or
GNU Lesser General Public License (“LGPL”). As applicable, the terms of the
GPL and LGPL, and information on obtaining access to the GPL code and LGPL
code used in this product, are available to view the full GPL Code Statement
at: https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WAR-RANTY and is subject to the copyrights of one or more authors. For
details, see the GPL code and the LGPL code for this product and the terms of
the GPL and LGPL.
Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such
software, D-Link will provide upon written request via email and/or
traditional paper mail the ap-plicable GPL and LGPLsource code files via CD-
ROM for a nominal cost to cover shipping and media charges as allowed under
the GPL and LGPL.
Please direct all inquiries to:
Snail Mail:
Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 14420 Myford Road, Suite 100
Irvine, CA 92606
Email:GPLCODE@dlink.com
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- The device may not cause harmful interface, and
- this device must accept any interface received, including interface that may cause undesired operation.
Technical Support
Having trouble installing your new product? D-Link’s website contains the
latest user documentation and software updates for D-Link products. Customers
can contact D-Link Technical Support through our website by choosing the
relevant region.
Contact Us
www.dlink.com/en/contact-us
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>