Akuvox Cloud Single Tenant Property Installation Guide

June 8, 2024
Akuvox

Akuvox logo Cloud Single Tenant Property
Installation Guide

Cloud Single Tenant Property

The following guide is designed to take an installer through the setup of an Akuvox Cloud Single Property account from start to finish. It is based around the R20X range of single button door intercoms and the X7HD indoor monitor (although the settings would be the same with any single button intercom or indoor monitor from Akuvox).
The example given sets up a single intercom with a single indoor monitor and two SmartPlus apps associated with that property.
For additional paid features such as more than 3 family members and/or landline service please contact your sales representative.
An Akuvox Cloud account is created on request for authorised installers. Please contact your sales representative.![Akuvox Cloud Single Tenant Property

The Setup Process

Adding users to your account, associating devices and adding additional family members is a simple process. For the best experience follow the steps as shown below.Akuvox Cloud Single Tenant Property - Figure 2

Installer Login

Akuvox Cloud Single Tenant Property - Figure 3https://ecloud.akuvox.com/manage
Please log in to the Akuvox Cloud Administrator website with the credentials provided by your sales representative.

Single-tenant Manager Role

Akuvox Cloud Single Tenant Property - Figure 4Akuvox cloud supports two management roles – Single tenant manager and Project Manager. As this guide is about the setup and management of Akuvox Cloud Single Property please ensure that the role is set to ‘Single- tenant Manager’ from the role options drop down box.

Adding a User

Akuvox Cloud Single Tenant Property - Figure 5Next we will create our first ‘User’. It can be easier to think of a user as the residential property as we are going to add devices to this user going forward.
Click User from the left hand menu followed by ‘New’.Akuvox Cloud Single
Tenant Property - Figure 6Enter the Name of the primary resident and their email address. This address will be used to send the app log in details so make sure that it’s an active account.
Alternatively, a mobile number can be used in place of an email address. In this case make sure that the Country/Region is set to United Kingdom (+44).
Fill out all other information as indicated by the arrows above taking note to set the correct time zone so that all time based logs or access rights are accurate.
Enter landline phone number(s) at this stage and enable the landline service if you wish to take advantage of calls from intercom to landline number(s) (additional fees apply).Akuvox Cloud Single Tenant Property - Figure
7Once added the User list should look like the above image. Each user on this page will represent a separate property associated with your installer account.

Adding Devices to the MAC Library

In order to add devices (intercoms and indoor monitors) to users (properties) they must first be added to the MAC library of your account.Akuvox Cloud
Single Tenant Property - Figure 8Select MAC Library from the menu on the left followed by ‘Add’Akuvox Cloud Single Tenant Property - Figure 9Enter the MAC address of each device followed by ‘Submit’.
The MAC address of a device can be found printed on the device box, a label on the back of a device and on the ‘Status’ page when logging in to the device via a web browser. Akuvox Cloud Single Tenant Property - Figure
10In the example above two devices have been added. The MAC address of an R20A intercom for making calls and the MAC address of an X7HD indoor monitor for answering calls within the property.
If when adding a MAC address an error message is shown check that you have entered 12 characters without spaces and that they are valid hexadecimal values (09,A-F).
If the MAC address is still rejected, please contact your sales representative.

Adding Devices to a User

With our devices added to the MAC Library we can now assign them to our user.
We will first add the intercom.Akuvox Cloud Single Tenant Property - Figure
11Return to the User page and click on the ‘Device’ button in the Action area for the user.Akuvox Cloud Single Tenant
Property - Figure 12On the Device List page click ‘New’.
Adding Devices to a User (Intercom)![Akuvox Cloud Single Tenant Property

  • Figure 13](https://manuals.plus/wp-content/uploads/2023/01/Akuvox-Cloud- Single-Tenant-Property-Figure-13.jpg) Enter the MAC address of the door intercom, select ‘Single-tenant Doorphone’ as the Device Type and enter the location of the intercom. The location name given will be visible to the end user in the SmartPlus app so make it logical and familiar to the user.
    Adding Devices to a User (Indoor Monitor)Akuvox Cloud Single Tenant
Property - Figure 14 The intercom will now be listed in the device list as shown. Once connected the Status icon should turn green (refreshing the page may be required).
    If the Status icon remains grey, first try rebooting the device. After a reboot, if Status icon remains grey then factory reset the device and check that the indoor monitor has valid IP address settings for internet connectivity. If the icon still fails to turn green, contact your sales representative.
    To add an indoor monitor to this property click ‘New’
    Adding Devices to a User (Indoor Monitor)Akuvox Cloud Single Tenant
Property - Figure 15 Fill in the MAC address of the indoor monitor, but this time select ‘Indoor Monitor’ as the Device Type. Once again, make sure that you give the device a logical location name relevant to where the device has been installed within the property. Click ‘Submit’ when ready.
    Adding Devices to a User
    The device list for this property should now look something like the image below.Akuvox Cloud Single Tenant Property - Figure 16There is no additional configuration required to set up calling between these two devices. Pressing the main call button on the door intercom will ring the indoor monitor and likewise the door intercom will now be listed in the contact list of the indoor monitor. Selecting the monitor or live view button on the indoor monitor will also show the camera feed of the door intercom.
    To add additional monitors or intercoms to this property repeat the steps of the last few pages.

Adding a Family Member

Adding optional family members to the property provides additional calling destinations for when the call button is pressed.
A total of four family members (including the primary user) can be assigned to a property under the standard plan.
Akuvox Cloud Single Tenant Property - Figure 17To add a family member return to the User page and click on the Family Member icon. The number next to the icon shows how many family members are currently assigned to the property in addition to the primary user.Akuvox Cloud Single
Tenant Property - Figure 18On the Family Member list page click ‘Add’.Akuvox Cloud Single Tenant Property - Figure
19Fill in the name of this family member followed by a valid email address. The user login details to be sent to this address. Select the correct Country/Region and enter a landline number of the landline line service is going to be used. Click ‘Submit’ to finish.
Note – the name of the family member will appear in the app of each family member and on the screen of any indoor monitor’s contacts list for simply calling between apps and devices. The email address used must be unique (the same address cannot be used for each family member).Akuvox Cloud Single
Tenant Property - Figure 20Repeat this process for any additional family members.

Appendix i) Logging in to the SmartPlus mobile app

Akuvox Cloud Single Tenant Property - Figure 21

Appendix ii) SmartPlus mobile app features

Akuvox Cloud Single Tenant Property - Figure 22

Akuvox logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals