Bellari BT587 Bluetooth Audio Adapter Instructions
- September 18, 2024
- Bellari
Table of Contents
Bellari BT587 Bluetooth Audio Adapter
Product Information
The Bellari BT587 is a Bluetooth Audio Adapter designed to enhance your music listening experience. Hand-built in Salt Lake City, Utah, the BT587 offers high-quality audio output and easy connectivity to your devices.
Specifications:
- Output Impedance: 1K Ohm RCA
- Power Requirements: 15 VDC, 500 mA; Part number PS27s
- Size: 5.5w x 3.5d x 1.5h
- Weight: .8 lbs
Product Usage Instructions
Connection Guide:
To pair a device with the BT587, follow these steps:
- Locate the BT587 (ROLLSBT) on your device’s Bluetooth settings.
- Connect to the BT587.
- A steady blue LED indicates successful pairing without audio. A slow blinking blue light means audio is being transmitted.
Power Management:
When powered off, the BT587 will remember the last paired device and
reconnect to it upon power up.
Volume Control:
Adjust the volume level of the RCA outputs using the volume control feature.
Frequency Controls:
The EQ section of the BT587 allows for frequency adjustments. The signal is at
unity gain when the controls are at the halfway position.
Pairing Devices:
To pair a new device, ensure the previously paired device is off or out of
range to allow the BT587 to connect to a different device.
Frequently Asked Questions (FAQ):
-
How do I reset the BT587?
To reset the BT587, simply power it off and back on again. It will then search for devices to pair with. -
Can I use the BT587 with non-Bluetooth devices?
No, the BT587 is specifically designed for Bluetooth connectivity and may not work with non-Bluetooth devices.
Thank you for purchasing the Bellari BT587. We spent a considerable amount of time designing and developing the BT587. We hope you enjoy using the BT587, and that it makes listening to your music collection rewarding. We sincerely appreciate the opportunity to build a product for you and participate in your love of quality music and sound. We love what we do and we’re happy to help. All Bellari products are hand built in Salt Lake City, Utah by people who care about high quality music.
What’s in the box
- 1 – Made in USA BT587
- 1 – 15V power supply PN PS27s
- 1 – This owners manual
SPECIFICATIONS
- Output Impedance: 1K Ohm RCA
- Power Requirements: 15 VDC, 500 mA; Part number PS27s
- Size: 5.5”w x 3.5”d x 1.5”h
- Weight: .8 lbs
PAIRING
To pair a device to the BT587 simply find the BT587 (ROLLSBT) on your device and connect. After the device is connected to the BT587 a steady blue led will light indicating that the BT587 is paired to a device, but no audio is present. A slow blinking blue light indicates that audio is being sent when paired.
When powered off the BT587 will remember the device it was previously paired with. On power up will search for that device and reconnect to it.
OVERVIEW
To stop a device from being paired so a different device can be paired. The previously paired device must be off, its Bluetooth disconnected from the BT587, our out of range as the BT587 remembers the device it was previously connected to and will continually search for that device until a different device is paired.