AXIOM FI-0169-00 Pole Adapter Instruction Manual

AXIOM FI-0169-00 Pole Adapter

AX16CL/AX8CL POLE ADAPTER
CODE: KPTPOLEAX16CL

Assembly Instructions

SUPPLIED MATERIALS

OPTIONAL MATERIALS

ASSEMBLY SEQUENCE

1. Remove the Pin (B).
2. Unscrew the 4 screws (C).
3. Remove the flange (A) from base.
4. Screw in the pole (D).
5. Insert the pole adapter (E).
6. Loosen the knobs (F) and (G).
7. Place the column (H).
8. Insert the front pin (I).
9. Insert the rear pin (L).
10. Tighten the knobs (F) and (G).

CONDITIONS OF USE

Proel do not accept any liability for damage caused to third parties due to improper installation, use of non-original spare parts, lack of maintenance, tampering or improper use of this product, including disregard of acceptable and applicable safety standards. Proel strongly recommends that this loudspeaker cabinet be suspended taking into consideration all current National, Federal, State and Local regulations. The product must be installed by qualified personnel only. Please contact the manufacturer for further information.

WARNING:

• The ground where the KPTFAX16CL floor stand is placed needs to be stable and compact.
• Adjust the feet so to put the KTPFAX16CL perfectly horizontal. Use a spirit level to obtain the best result.
• Always secure ground stacked setups against movement and possible tipping over.
• A maximum of 1 x AX16CL or 2 x AX8CL speakers are allowed to be installed over a KPTFAX16CL with pole serving as ground support.
• The column must be setup with 0° aiming.

PROEL S.p.A. –
Via alla Ruenia 37/43 –
64027 Sant’Omero (Te) –
ITALY
Tel: +39 0861 81241
www.axiomproaudio.com

References

• Axiom Pro Audio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>