AXIOM AX16CL Floor and Front Fill Installation with foam Stand Instruction Manual
- June 8, 2024
- AXiom
Table of Contents
AXIOM AX16CL Floor and Front Fill Installation with foam Stand
AX16CL/AX8CL FLOOR AND FRONT FILL INSTALLATION WITH FOAM STAND
CODE: KPTFAXCL
Assembly Instructions
SUPPLIED MATERIALS
TYPICAL APPLICATIONS
CONDITIONS OF USE
Proel do not accept any liability for damage caused to third parties due to
improper installation, use of non-original spare parts, lack of maintenance,
tampering or improper use of this product, including disregard of acceptable
and applicable safety standards. Proel strongly recommends that this
loudspeaker cabinet be suspended taking into consideration all current
National, Federal, State and Local regulations. The product must be installed
by qualified personnel only. Please contact the manufacturer for further
information.
WARNINGS:
- KPTFAX8CL can be used in front-fill or monitor applications on stage.
- The ground where the KPTFAXCL foam stand is placed needs to be stable and compact.
- When using this support for from till application, place it on a stable surface. If it is placed on a front line subwoofer, it must be secured to it using a strap, because the subwoofer vibrations could cause it to fall to ground.
PROEL S.p.A. – Via alla Ruenia 37/43 – 64027 Sant’Omero (Te) – ITALY Tel: +39 0861 81241 www.axiomproaudio.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>