tempmate i16MCS100 i1 Single Use Temperature Indicator User Manual
- June 8, 2024
- tempmate
Table of Contents
tempmate i16MCS100 i1 Single Use Temperature Indicator
Single-Use Temperature Indicator for Cold Chain Temperature Monitoring
Operation Instructions
- Break the tab to start the device – notice that the green LED flashes three times to indicate a correct start.
- Attach the started tempmate.®-i1 to your shipment.
- Check the status after receiving the goods.
Using Notes
- Take care of the expiry date
- Don‘t hold the indicator too long in your hand (false alarm through self-heating)
- Before using, cool or heat the indicator to operating temperature
- The indicator can only be started, not stopped
- Only for disposable use
- T +49 7131 6354 0
- F +49 7131 6354 100
- info@tempmate.com
- www.tempmate.com
References
- tempmate.® - data logger & supply chain monitoring
- tempmate.® | Data Logger & Supply Chain Monitoring Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>