SpeaKa SP-HDS-200 3 Port HDMI Switch Instruction Manual

: June 8, 2024
: SpeaKa

SpeaKa SP-HDS-200 3 Port HDMI Switch

SpeaKa SP-HDS-200 3 Port HDMI Switch

Intended use

This product can be used to connect up to 3 HDMI-compatible playback sources to an HDMI compatible display device. You can then easily switch between the 3 playback sources.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances.
Using the product for purposes other than those described above may damage the product. Improper use can cause a short circuit, fire or other hazards.
This product complies with statutory, national and European regulations. For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.

Delivery content

Product
Micro USB cable
Remote control
Operating instructions

Latest product information

Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we will assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General information

This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
Should you have any questions or concerns after reading this document, please contact our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist repair centre.

Handling

Handle the product carefully. Impact, shocks or a fall even from a low height can damage the product.

Operating conditions

Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours, and solvents.
Protect the product from high humidity and moisture.
The product must not be exposed to direct sunlight.
Never switch the device on immediately after taking it from a cold into a warm environment. This may cause condensation to form, which can destroy the product. Allow the product to reach room temperature before using it.

Operation

Consult an expert when in doubt about the operation, safety or connection of the device.
If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.

(Rechargeable) batteries

Pay attention to correct polarity when inserting the batteries.
If you do not plan to use the product for an extended period, remove the batteries to prevent damage from leaking. Leaking or damaged batteries may cause acid burns if they come into contact with your skin. Always use suitable protective gloves when handling damaged batteries.
Batteries must be kept out of reach of children. Do not leave batteries lying around, as there is a risk that children or pets may swallow them.
All batteries should be replaced at the same time. Mixing old and new batteries in the device can lead to battery leakage and device damage.
Batteries must not be dismantled, short-circuited or thrown into open flames. Never attempt to recharge non-rechargeable batteries. This may cause an explosion!

Connected devices

Always observe the safety information and operating instructions of any other devices which are connected to the product.

Overview of product

Micro USB input
HDMI input 1
HDMI input 2
HDMI input 3
HDMI output
Status LEDs
Switch button
Remote control

Installation and setup

Inserting batteries into the remote control

Remove the battery compartment cover on the underside of the remote control (8).
Insert 2x 1.5 V AAA batteries (not included) with correct polarity. Pay attention to the polarity markings inside the battery compartment.
Close the battery compartment.

Connecting devices

Connect the HDMI output of the first playback source to the HDMI input 1 (2) on the product.
Connect the HDMI output of the second playback source to the HDMI input 2 (3) on the product.
Connect the HDMI output of the third playback source to the HDMI input 3 (4) on the product.
Connect the HDMI input of the display device to the HDMI output (5) on the product.
Note: – Use suitable premium high-speed or ultra-high-speed HDMI cables with a maximum length of 3 m if you want to play videos with 8K resolution at a 60 Hz frame rate, or 4K resolution at a 120 Hz frame rate.
Connect the supplied micro USB cable to the micro USB input (1), and then connect it to
a suitable power adapter (5 V/DC, max. 1 A).
Connect the mains plug on the power adapter to a suitable socket.
The product will turn on and the status LED (6) labelled “power” will light up.
Select the desired playback source:
– by pressing the switch button (7) or
– with the remote control (8).
The status LEDs (6) labelled with “Out” and the number of the selected HDMI input will light up and the HDMI signal will be forwarded to the display device.

Troubleshooting

Problem	Reason	Solution
No image is displayed on the playback device	The HDMI cables are not
connected properly	Check that the HDMI cables are connected correctly and are

securely in place.
HDMI cables are unsuitable| Use a premium high-speed or ultra-high-speed HDMI cable.
Error on the playback source or display device| Connect the playback source directly to the display device.
If the issue persists, there is a problem with one of the devices. Refer to the manufacturer’s instructions for troubleshooting.
No power supply| Make sure that the micro-USB plug on the power adapter
is properly connected to the micro-USB input (3) and that the mains plug is plugged into a suitable socket.
No 8K / 4K resolution| The playback source or playback device does not support 8K / 4K| Check that all of the connected devices support 8K / 4K.
The HDMI cable does not support 8K / 4K.| Use a premium high-speed or ultra- high-speed HDMI cable.

Cleaning and care

Important:
– Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions. These may damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.

Disconnect the product from the power supply.
Disconnect all connected cables.
Clean the product with a dry, lint-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

Power supply

Input voltage / current
HDMI switch……. 5 V/DC, max. 1 A
Remote control……. 2x 1.5 V AAA batteries
Power consumption……. Max. 2.5 W

Video signal

Bandwidth……. 48 Gbit/s
Supported resolution ….. 7680 x 4320 px (8K) at 60 Hz frame rate according to HDMI 2.1 specification 4096 x 2160 px (4K) at 120 Hz frame rate according to HDMI 2.1 specification 1920 x 1080 px (Full HD) at 240 Hz frame rate according to HDMI 2.1 specification
Colour depth…… 16 bit

Ambient conditions

Operating temperature…… 0 to +45 °C
Operating humidity… 20 – 90 % RH
Storage temperature…… -20 to +60 °C
Storage humidity…… 5 – 95 % RH

Miscellaneous

Dimensions (W x H x D) … 114 x 62 x 23 mm
Weight … 70 g
Maximum HDMI cable length …. 3 m

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright 2022 by Conrad Electronic SE.