NOVALUX 84039 80W LED Shoebox Fixture Instruction Manual
- June 4, 2024
- NOVALUX
Table of Contents
NOVALUX 84039 80W LED Shoebox Fixture
INSTALLATION INSTRUCTION
PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the instructions before you install and use the luminaire.
WARNING, CAUTIONS AND OPERATING INSTRUCTIONS
-
To reduce the risk of death, personal injury or property damage from
fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels. -
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
-
Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.
-
For The installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
-
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
-
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
-
Do not cover any part of the fixture; this can cause overheating.
WARNING: RISK OF FIRE OR ELECTRICAL SHOCK
- Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
- Turn off the power when you perform any maintenance.
- Verify that supply voltage is correct by comparing it with the luminaire label information.
- Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code requirements.
- All wiring connections should be capped with UL-approved wire connectors.
CAUTION: RISK OF INJURY
- Avoid direct eye exposure to the light source while it is on.
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Suitable for Wet locations.
WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.
The product requires a top-mounted shorting cap or optional twist-lock photocell installed to operate.
TRUNNION MOUNTING (POLE)
TRUNNION MOUNTING (WALL)
MOUNTING
SLIP FITTER MOUNTING
POLE MOUNTING
SENSOR INSTALLATION FOR POLE BRACKET
PREMIUM QUALITY LIGHTING®
-
www.PQLighting.com
© P.Q.L., Inc. -
2285 Ward Avenue
-
Simi Valley, CA 93065
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>