WATTS RadiantPEX-AL Press and Compression Connections Instruction Manual
- June 8, 2024
- WATTS
Table of Contents
WATTS RadiantPEX-AL Press and Compression Connections
For Residential or Commercial Radiant Heating and Snow Melt Applications
RadiantPEX-AL™ Press & Compression Connections
WARNING
Read these instructions and all product labels BEFORE installation.
Installation must be performed by qualified personnel, in accordance with
local codes and standards.FAILURE TO COMPLY WITH PROPER INSTALLATION IN-
STRUCTIONS COULD DAMAGE TUBING AND FITTINGS CAUSING WATER DAMAGE AND/OR DAMAGE
TO THE PIPING SYSTEM WHICH CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL
INJURY
NOTICE
- Only use Watts Radiant fittings that correspond to the selected size and type of tubing. Improper sizing can result in leaks.
- Wrap completed connections with PVC electricians tape or shrink wrap if they will be buried in concrete or other masonry material.
- For sweat fittings, remove o-rings and insulator washer before soldering. Once cool, be sure to re-install.
- Do not splice multiple lengths of RadiantPEX-AL tubing together as this will result in increased pressure drops. Refer to the tubing installation manual available from Watts.com for recommended circuit lengths and other tub-ing installation guidelines.
- Repairing RadiantPEX-AL that has been in service requires special atten-tion, particularly when glycol has been used. Any residual amounts of glycol or any other coating or debris inside the tube must be removed and all fitting surfaces must be clean before making connections.
- Watts RadiantPEX-AL fittings are engineered to work together. Watts extends no warranty – express or implied – to any failure or damage of any kind resulting from the use of materials not specified by Watts.
O-rings and insulator must be re-installed before tubing is installed and the connection finalized. Refer to Watts Radiant’s Product Catalog for connection and tool options.
RadiantPEX-AL™ Connections – Compression
RadiantPEX-AL compression fittings include o-rings on the barbed section and
an internal compression ring with an external compression nut.
Installation
- Cut the Tubing. Use a tubing cutter. Ensure the cut is straight and clean.
- Make the connection
- Use a reamer tool to prepare the end of the tubing for the connection.
- Slide the compression nut over the tubing.
- Slide the compression ring over the tubing.
- Ensure the insulator washer is in place in the recess of the fitting.
- Slide the RadiantPEX-AL tubing over the barb. Make sure the tubing is seated against the insulator washer insert.
- Slide the compression nut up and begin threading it onto the fitting. The compression ring will automatically be positioned as you tighten the nut..
- Use an open-end wrench to complete the connection (do not use a crescent wrench). Tighten the connection to 20 in/lb (2.3 N-M) (snug and then an additional 1/4 turn).
- Pressure Test
Test all connections between 50 to 100 psi (3.4 to 6.9 bar) with either air or water (do not use both). If temperatures are near or below freezing, do not use water.
Compression Fitting
PEX-AL Compression Fitting Parts
Description| Qty| Order #
3/8″ (9.5 mm) Compression Fitting Insulators| 10| 81011165
1/2″ (12.7 mm) Compression Fitting Insulators| 10| 81010697
5/8″ (15.9 mm) Compression Fitting Insulators| 10| 81009456
1″ (25.4 mm) Compression Fitting Insulators| 10| 81009460
3/8″ (9.5 mm) Compression Fitting O-Ring| 10| 81011167
1/2″ (12.7 mm) Compression Fitting O-Ring| 10| 81010652
5/8″ (15.9 mm) Compression Fitting O-Ring| 10| 81008567
3/4″ (19.1 mm) Compression Fitting O-Ring| 10| 81008568
1″ (25.4 mm) Compression Fitting O-Ring| 10| 81008569
PEX-AL Compression Fitting Parts
Description| Qty| Order #
3/8″ (9.5 mm) Compression Fitting Insulators| 10| 81011165
1/2″ (12.7 mm) Compression Fitting Insulators| 10| 81010697
5/8″ (15.9 mm) Compression Fitting Insulators| 10| 81009456
1″ (25.4 mm) Compression Fitting Insulators| 10| 81009460
3/8″ (9.5 mm) Compression Fitting O-Ring| 10| 81011167
1/2″ (12.7 mm) Compression Fitting O-Ring| 10| 81010652
5/8″ (15.9 mm) Compression Fitting O-Ring| 10| 81008567
3/4″ (19.1 mm) Compression Fitting O-Ring| 10| 81008568
1″ (25.4 mm) Compression Fitting O-Ring| 10| 81008569
Warranty
Limited Warranty: Watts Regulator Co. (the “Company”) warrants each product to
be free from defects in material and workmanship under normal usage for a
period of one year from the date of original shipment. In the event of such
defects within the warranty period, the Company will, at its option, replace
or recondition the product without charge.
THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY
GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy described in the first paragraph of this warranty shall constitute
the sole and exclusive remedy for breach of warranty, and the Company shall
not be responsible for any incidental, special or consequential damages,
including without limitation, lost profits or the cost of repairing or
replacing other property which is damaged if this product does not work
properly, other costs resulting from labor charges, delays, vandalism,
negligence, fouling caused by foreign material, damage from adverse water
conditions, chemical, or any other circumstances over which the Company has no
control. This warranty shall be invalidated by any abuse, misuse,
misapplication, improper installation or improper maintenance or alteration of
the product. Some States do not allow limitations on how long an implied
warranty lasts, and some States do not allow the exclusion or limitation of
incidental or consequential damages. Therefore the above limitations may not
apply to you. This Limited Warranty gives you specific legal rights, and you
may have other rights that vary from State to State. You should consult
applicable state laws to determine your rights. SO FAR AS IS CONSISTENT WITH
APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF
ORIGINAL SHIPMENT.
IS-WR-RadiantPEX-AL-Connections 2207
USA: T: 800-276-2419
F: 417-864-8161
Watts.com
Canada: T: 888-208-8927
F: 905-481-2316
Watts.ca Latin America : T: (52) 55-4122-0138
Watts.com
© 2022 Watts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>