SWIT SL-100P/SL-150P Flexible Bi-Solor SMD LED Light User Manual

SL-100P/SL-150P
Flexible Bi-Color SMD LED Light
Ver: B
USER MANUAL
SWIT Electronics Co., Ltd.
Congratulations on your purchase of this product.
Please read this user manual carefully.

Specification

Controller: 1.06Kg Adaptor: 0.58Kg

General Precautions

1. Do not disassembly the light or touch the interior of the light with metal objects to prevent causing damage;
2. Please avoid storing the light in dusty and wet environment to prevent causing damage;
3. Please avoid scratching the light body with hard object to prevent affecting the using effect;
4. Slight oil stains on the surface of the lamp body can be wiped with a clean cloth;
5. This products can only be using in the temperature range of -10°C-40°C.

Overview

1. Light strips
2. Warp corner
3. Light input connection cable
4. X bracket
5. Light body
6. Magic sticker| 7. Color temp indicator light
8. Color temp knob
9. Brightness knob
10. Brightness indicator light
11. LCD screen
12. DMX OUT| 13. DMX IN
14. Control box output cable
15. Power switch
16. DC 11-36V IN
17. Battery plate
18. USB interface
---|---|---

LCD display information

Take “CCT=5600K, Dimmer=100%, DMX address:008 (Group:8)” as an example:

1. Control Mode—DMX Mode

2. Current Brightness

3. Current Color Temperature

4. Current DMX Address

5. Current setting number

6. Control Mode—
   Group Control Mode

7. Group Number

Using Instruction

1. Installation
   Any bend of this products will have no effects during using.Light can be fixed on back of a chair,top of the car or any narrow space,or as shown on Fig.3,hold up with the X-bracket.
   Tip: Users who choose arc soft cover and egg soft box should first hold up the lamp body as shown in Fig.3, and then assemble the arc soft cover and egg soft box The light box can be used normally by fixing it on the lamp body with Magic Stick.

2. Power

3. Power supply
   The products can be powered by batteries and AC adaptor.

4. Usage
   Connect the control box output cable(Fig.4 (14) with light input connection cable(Fig.3 (3) after installation according to the requirements, switch on the light(Fig.5 (15), set the light parameters, then it can be used normally.

5. Parameters and working mode setting

6. Setting and usage of Brightness & Color Temperature
   Color temperature/Brightness can be controlled by Color temperature/Brightness knob(Fig.4( 8/9)The range of Color Temperature & Brightness are shown as below:
   • Color Temperature adjusting range: 2700K-6500K; Min adjusting steps:50K;
   • Brightness adjusting range:0%-100%, Min adjusting steps:1%.

7. DMX Address Setting
   See 4.1

8. GROUP Setting
   See 5.1

9. Working Mode Setting
   Hold color temperature adjusting knob (Fig.4 ⑧) for 2s,then DMX mode(Fig.6) or Group Mode(Fig.9) can be switched.

10. DMX Communication Mode

11. DMX Address setting
    Hold the brightness adjusting knob(Fig.4⑨) for about 2s to enter in the DMX address setting interface(Fig.8), set DMX address with Brightness adjusting knob(Fig.4⑨), DMX communication address adjusting range:001-512.
    • Set the number of current bit with brightness adjusting knob(Fig.4⑨);
    • Press brightness adjusting knob(Fig.4⑨) to confirm the number of current bit and enter in the setting of next bit number;
    • Exit DMX communication setting interface: Stop operating or change the setting number to the last bit then press the brightness adjusting knob.

12. Usage of DMX Communication Mode Complete the DMX address parameter setting of the product according to the expected demand, connect the lamp and DMX control equipment reliably through DMX line, then it can be used normally. This product occupies a total of two DMX control channels, currently set the DMX address (N) for brightness control, address (N+1) for color temperature control, such as:
    DMX Address| DMX Channel| Function
    ---|---|---
    008| 008| Brightness adjusting:0%-100%
    009| Color temperature adjusting:2700K-6500K

13. GROUP Control Mode

14. GROUP Control Mode Parameters Setting
    Hold the Brightness adjusting knob(Fig.4⑨) for about 2s to enter in Group parameters setting group interface (Fig.11), adjust the brightness knob(Fig.4⑨) to set Group parameters, Group parameters setting range: 1-8, Stop operating or change the setting number to the last bit then press the brightness adjusting knob.

15. GROUP Control mode Usage
    Set the parameters of the Group according to the expected demand, set the target light to be controlled into the same Group, network the light through DMX cable, and the light can be used normally without distinguishing the master and slave machines.
    Tips: When using the group control function of the light, do not access the output device of DMX signal in the light network, otherwise the function cannot be used normally.

16. USB Interface usage
    USB Interface(Fig.5 (8) )is for specific use, Please use it according to the specified environment of the relevant products of our company. Do not use it for other purposes to avoid losses.

needs
7| Eggcrate (Option)

Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: contact@swit.cc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>