FOCUS FC-PB-10BLW 10000 mAh Ultra Portable LED Display Wireless Charging Power Bank User Manual
- June 4, 2024
- Focus
Table of Contents
FOCUS FC-PB-10BLW 10000 mAh Ultra Portable LED Display Wireless Charging
Power Bank
WELCOME! Dear Focus Customer, Congratulations on your purchase of the Focus 10,000 mAh UltraPortable LED Display Wireless Charging Power Bank. To ensure your safety and many years of trouble-free operation, please read this manual carefully before using this device and keep it in a safe place for future reference. We hope you enjoy your new Focus Power Bank. Sincerely, The Focus Camera Team
PACKAGE CONTENTS
- Power Bank
- Type-C Charging Cable
PARTS & CONTROLS
- Power button
- LED display
- Type-C PD 18W input/output
- USB-A QC3.0 output
- Micro USB input
- Wireless sensor area
- Wireless charging LED indicator
OPERATING INSTRUCTIONS
Charging a Device Wirelessly
- Press the power button. All three LED indicator lights (red, blue, and green) will flash.
- The red LED light will remain on. This means that wireless charging is on standby.
- Place your phone or other device on the top of the power bank. When the bank is powering correctly, it will change from the red indicator to the blue and green indicators. These lights mean the power bank is in wireless charging mode.
Charging a Device Using a Cable
- Plug a USB-C cable (included) or Micro USB cable into the power bank, and charge your mobile device directly.
- Press the power button, and the bank will start to charge your device. If the LED display shows “Fast”, the fast charge function is activated.
Charging the Power Bank
Insert the Micro USB connector or Type-C connector into the power bank, and
connect the USB-A connector to a QC3.0 adapter or PD adapter. If the LED
display shows “Fast”, the fast charge function is activated. Depending on the
device, the power bank should provide 2 to 3 charges before it needs to be
charged.
TECHNICAL SPECIFICATIONS
- Input 1 (Micro USB): 5V 2A, 9V 2A
- Input 2 (Type-C PD3.0): 5V 2A, 9V 2A
- Output 1 (Type-C PD3.0): 5V 3A, 9V 2A, 12V 1.5A
- Output 2 (USB-A QC3.0): 5V 3A, 9V 2A, 12V 1.5A Total
- Output: 3A or 18W
- Housing Material: ABS+PC
- Battery Type: Lithium Polymer
- Battery Capacity: 10,000 mAh
- Operating Temperature: 32 – 113 °F
- Transport and Storage Temperature:-4- 122 °F
- Dimensions (L x W x D): 5.7″ x 2.8″ x 0.6″
- Weight: 8.1 oz.
SAFETY INSTRUCTIONS
Follow basic precautions and these safety instructions before use:
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating.
- Overload outputs above rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behavior resulting in fore, explosion or risk of injury.
- Do not disassemble the device.
- Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 212°F may cause explosion.
WARRANTY
Focus provides a 1-year limited warranty covering parts and labor. To learn more about the Focus warranty service, email Customer Service at cs@focuscamera.com.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>