SANUS SAL-IWCM2 In-Wall Cable Access Management Kit Instruction Manual

SANUS SAL-IWCM2 In-Wall Cable Access Management Kit

Tools Required

1. LOCATE
   Find you desired locations (between studs).

2. TRACE
   Trace the template at your locations.

3. CUT
   Cut out the holes in the drywall.

4. RUN CABLES
   Run your low voltage cables.

5. ASSEMBLE
   Snap the lock tabs in place.

6. SCREW PREP
   Hand tread the screws into the lock tabs.

7. SECURE
   Insert into the wall and secure the lock tabs by turning the scews.

8. FINISH
   Install the cover plate.

Herramientas necesarias

1. LOCALIZAR|
   Busque los lugares deseados (entre montantes).

2. DELINEAR
   Delinee la plantilla en los lugares elegidos.

3. CORTAR
   Corte los orificios en la pared.

4. PASAR LOS
   Pase los cables de bajo voltaje.

5. ENSAMBLAR
   Coloque las pestañas de bloqueo en su lugar.

6. PREPARAR LOS TORNILLOS
   Introduzca a mano los tornillos en las pestañas de bloqueo.

7. FIJAR
   Inserte la placa en la pared y atornille las pestañas de bloqueo para fijarlas.

8. TERMINAR
   Instale la tapa.

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ ENTIRE MANUAL PRIOR TO USE SAVE THESE INSTRUCTIONS

CAUTION: Avoid potential personal injuries and property damage!

• FOR LOW VOLTAGE CABLES ONLY.
• RISK OF FIRE – DO NOT install power supply cord within the wall cavity.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact customer service.

Legrand AV Inc. and its affiliated corporations and subsidiaries
(collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

©2021 Legrand AV Inc. All rights reserved. SANUS is a brand of Legrand. SANUS and the SANUS logo are registered trademarks. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

• Legrand AV Inc. 6436 City West Parkway
• Eden Prairie, MN 55344 USA

Legrand AV Inc. 6436 City West Parkway Eden Prairie, MN 55344 USA

We’ll Make It Stress-Free : If you have any questions, just give us a call. 800-321-2343

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>