AJAX AJ-COMBIPROTECT-W CombiProtect Motion Glassbreak Detector User Guide

June 4, 2024
ajax

AJAX logo

Quick Start Guide
Motion/glass break detector
Model Name: Ajax CombiProtect
Wireless motion and glass break detector with pet immune

CombiProtect combines a wireless motion detector with a PIR sensor and a radius up to 12 meters, as well as a glass break microphone with a distance up to 9 meters. CombiProtect is connected to the Ajax security system via the protected Jeweller protocol, with an effective communication range of up to 1,200 meters without obstacles. CombiProtect can ignore animals. Operate up to 7 years from a battery and is designed for use indoors.
IMPORTANT: This Quick Start Guide contains general information about the CombiProtect. Before using the device, we recommend to reviewing the User Manual on the
website: ajax.systems/support/devices/combiprotect

FUNCTIONAL ELEMENTS

AJAX AJ COMBIPROTECT W CombiProtect Motion Glassbreak
Detector

  1. Light indicator.
  2. Motion detector lens.
  3.  Microphone hole.AJAX AJ COMBIPROTECT W CombiProtect Motion Glassbreak Detector - SmartBracket
  4. SmartBracket attachment panel (perforated part is required for actuating the tamper in case of any attempt to tear off the detector from the surface).AJAX AJ COMBIPROTECT W CombiProtect Motion Glassbreak Detector - Tamper button.
  5.  Tamper button.
  6.  Device switch.
  7.  QR code.

LOCATION SELECTION

When selecting a CombiProtect installation location, please take into account the lens direction, the detection range of motion and glass break and the presence of any obstacles
impairing the view and radio signal transmission.AJAX AJ COMBIPROTECT W
CombiProtect Motion Glassbreak Detector - Tamper button Do not install the detector:

  1. Outside the premises (outdoors).
  2. In the direction of the window, when the detector lens is exposed to direct sunlight.
  3. Opposite any object with a rapidly changing temperature (e.g., electrical and gas heaters).
  4. Opposite any moving objects with a temperature close to the one of the human body (oscillating curtains above the radiator).
  5. At any places with fast air circulation (air fans, open windows or doors).
  6. Nearby any metal objects and mirrors causing radio signal attenuation or screening it.
  7. Within any premises with the temperature and humidity beyond the range of permissible limits.

Prior to the attachment of the detector to a surface with screws, please perform signal strength test as well as a detection area test in the Ajax Security System application for at least a minute. This will demonstrate communication quality between the detector and the hub and ensures proper installation place selection.

Status indicator

| Signal level
---|---
Lights with interruptions
once every 1.5 seconds| | Excellent signal level
Blinks 5 times per second| | Good signal level
Blinks 2 times per second| | Poor signal level
Lights up for a short time
once every 1.5 seconds| | No signal

The CombiProtect detector should be attached to a vertical surface. Recommended installation height – 2.4 m. Otherwise, the motion detection area will change and the animal ignoring function could be impaired.

MOUNTING THE DEVICE

  1. Attach the SmartBracket panel to the surface at least in two fixing points (one above the tamper) using bundled screws or other no less reliable attachment hardware.AJAX AJ COMBIPROTECT W CombiProtect Motion Glassbreak Detector - Attaching on a flat
  2. Put the detector on the panel – single blink of the light indicator will confirm that the tamper has been

CONNECTING AND SETTING UP

The detector is connected to the hub and set up via the Ajax Security system mobile application. To establish a connection please locate the detector and the hub within the communication range and follow the device adding procedure.
To connect the detector to a third-party security central unit using the Ajax cartridge or Ajax Oxbridge Plus integration module, follow the recommendations in the user manual of the respective device.  Before using the detector, set up the suitable sensitivity level of the sensor in the CombiProtect settings:

Sensitivity level

High| For premises with a minimum amount of interference, very fast movement detection
Medium| For premises with a number of probable interferences (windows, radiators, air conditioner, etc.)
Low| Does not respond to animals with a weight below 20 kg and height up to 50 cm

And the glass break the microphone sensitivity level. If there is no need to track motion or glass break, each of the functions can be disabled.
If the detector is located in a room requiring 24-hour control, activate the “Always active” mode – MotionProtect will respond to any motion and glass breaking, even if the
the system is not in the arming mode.

COMPLETE SET

  1. CombiProtect.
  2. Battery CR123A (pre-installed).
  3. Installation kit.
  4. Quick Start Guide.

TECH SPECS

Sensitive element PIR sensor (motion) electret microphone (glass break)
Motion detection distance p to 12 m
Motion detector viewing angles (H/V) 88.5°/80°
Animal ignoring option Weight up to 20 kg, height up to 50 cm
Glass break detection distance Up to 9 m
Anti-tamper switch Yes
Frequency band 868.0-868.6 mHz
Maximum RF output power Up to 20 mW
Modulation FM
Radio signal Up to 1,200 m (any obstacles absent)
Power supply 1 battery CR123A, 3 V
Вattery life Up to 7 years
Operating temperature range From 0°С to +50°С
Operating humidity Up to 80%
Overall dimensions 110 х 65 x 50 mm
Weight 92 g

WARRANTY

The warranty for the Ajax Systems Inc. devices is valid for 2 years after the purchase and does not apply to the supplied battery. If the device does not work correctly, you
should first contact the support service—in half of the cases, technical issues can be solved remotely! The full text of the warranty is available on the
website: ajax.systems/warranty
User Agreement: ajax.systems/end-user-agreement
Technical support: support@ajax.systems

IMPORTANT INFОRMATION

This product can be used across all EU member states. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
All essential radio test suites have been carried out.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Manufacturer: Research and Production Enterprise “Ajax” LLC
Address: Sklyarenko 5, Kyiv, 04073, Ukraine
By request of Ajax Systems Inc.
www.ajax.systems

Documents / Resources

| AJAX AJ-COMBIPROTECT-W CombiProtect Motion Glassbreak Detector [pdf] User Guide
AJ-COMBIPROTECT-W, CombiProtect Motion Glassbreak Detector, AJ-COMBIPROTECT-W CombiProtect Motion Glassbreak Detector
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals