HIKVISION DS-PDC10AM-EG2-WE-WB Wireless PIR AM Curtain Detector User Manual
- June 8, 2024
- Hikvision
Table of Contents
DS-PDC10AM-EG2-WE/WB
Wireless PIR AM Curtain Detector
DS-PDC10AM-EG2-WE-WB Wireless PIR AM Curtain Detector
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to
change,
without notice, due to firmware updates or other reasons. Please find the
latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals
trained in supporting the Product.
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned are the properties
of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR
OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU
ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT
DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT
LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF
MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL
WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR
UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
This product and – if applicable – the supplied accessories too are
marked with “CE” and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,
the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see:
www.recyclethis.info
The additional force shall be equal to three times the weight of the
equipment but not less than 50N. The equipment and its associated mounting
means shall remain secure during the installation. After the installation, the
equipment, including any associated mounting plate, shall not be damaged.
**** 2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European Union. See
the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information see:
www.recyclethis.info
**** replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types);
– disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas; and
– a battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas Chemical burning danger
Do not swallow the battery.
Keep new and used batteries away from the children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
Risk of explosion if battery is replaced by an incorrect type.
Replacement of a battery with an incorrect type that can defeat a safeguard.
Dispose of used batteries according to the instructions and local regulation.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
Appearance
Enrollment
• Enrollment Preparation
Log in to the APP Store, download and install the App.
Power on the security control panel.
Log in the APP and tap the icon “+” . Scan the QR code or input the control
panel serial No. to add the control panel.
-
Enroll the Peripheral Locally
In the APP, tap the “Enrollment Mode” button on the control panel page to make the control panel enter the enrollment status. -
Enroll the Peripheral with QR and serial No.
In the APP, tap the icon “+”and scan the QR code or serial No. on the peripheral.
Installation
- Check Signal Strength
Solid Green for 3 s – Strong Signal
Solid Orange for 3 s – Medium Signal
Solid Red for 3 s – Weak Signal
Flash Red for 6 times – Lost Signal
Anti-Masking Alarm
Set Up with App
You can view the device status including temperature, signal intensity,
battery level, lid, external input, etc.,on the device page.
Tap the button to enter the settings page.
Operation Caution and Device Maintenance
– All the electronic operation should be strictly compliance with the
electrical safety regulations, fire prevention regulations and other related
regulations in your local region.
– Do not drop the device or subject it to physical shock, and do not expose it
to high electromagnetism radiation. Avoid the equipment installation on
vibrations surface or places subject to shock (ignorance can cause equipment
damage).
– Please make sure that the power has been disconnected before you wire,
install or dismantle the device.
– If smoke, odors or noise rise from the device, turn off the power at once
and unplug the power cable, and then please contact the service center.
– Do not drop the device or subject it to physical shock, and do not expose it
to high electromagnetism radiation. Avoid the equipment installation on
vibrations surface or places subject to shock (ignorance can cause equipment
damage).
– Do not place the device in extremely hot (refer to the specification of the
device for the detailed operation temperature), cold, dusty or damp locations,
and do not expose it to high electromagnetic radiation.
– The device for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source
such as heater or radiator is forbidden (ignorance can cause fire danger).
– Do not aim the device at the sun or extra bright places. A blooming or smear
may occur otherwise (which is not a malfunction however), and affecting the
endurance of sensor at the same time.
– Improper use or replacement of the battery may result in hazard of
explosion. Replace with the same or equivalent type only. Dispose of used
batteries according to the instructions provided by the battery manufacturer.
– Do not expose the device to the corrosive gas. Otherwise the equipment
damage may occur.
– Do not expose the device to the explosive situation.
Specification
Detection range| Wall Mount: 10m
Ceiling Mount: 5m
---|---
Auto Sensitivity| Yes
Pet Immunity| Wall Mount: 12kg
Ceiling Mount: None
Tamper Protection| Front, Rear
LED Indicators| Blue(Alarm), Green+Orange(Mask)
Operation Temperature| -25 °C to 60 °C (-13 °F to 140 °F)
Storage Temperature| -25 °C to 60 °C (-13 °F to 140 °F)
Operation Humidity| 10% to 90%
Mounting Height| 2 to 3.5m
Dimension (WxHxD)| 29.2 mm x 134.4 mm x 39.5 mm
Weight| 118.5g
Transmission Frequency| 433/868 MHz
RF range| 1 km (free space)
Battery Type| CR123A x 2 (included)
Standard Battery Life| 5 Years
Low Battery Voltage| 2.45 V
Current| Max. current: 24mA Quiescent current: 25uA
Bracket| L-shaped adapter included
UD25546B
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang
District, Hangzhou 310052, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>