AJAX SpaceControl Smart Key Fob User Manual
- June 8, 2024
- ajax
Table of Contents
AJAX Space Control Smart Key Fob
Space Control is a miniature key fob with accidental click protection. It
allows to set the Ajax security system in the armed, night or disarmed mode,
as well as switch on an alarm.
As it is the two-way communication, you will know whether the system has
received the SpaceControl command.
Operating as part of the Ajax security system, the key fob is connected to the hub via the protected Jeweller protocol. In addition, the key fob can be used to control any third party security central unit through the uartBridge or ocBridge Plus integration module.
The key fob is set up through the iOS and Android-based mobile app for smartphones.
Functional elements
- System arming button
- System disarming button
- Night mode button
- Panic button (activates the alarm)
- Light indicators
- The hole for attaching the key fob
Buttons can be assigned when using a key fob with hub and Ajax uartBridge. At the moment, the feature of modification of commands (and deactivation) of the key fob buttons when using with the Ajax hub is not available.
Using the key fob
Maximum connection distance between the key fob and the hub – 1,300 meters. This distance is reduced by walls, inserted floors and any objects hindering the signal transmission. via the integration module). If you connect the key fob to a new security system, it will cease to interact with the previous system. However, the key fob will not be automatically deleted from the list of devices of the hub.
The key fob can:
- Arm the system – press the button O once
- Turn on the night mode – press the button once
- Disarm the system – press the button once
- Switch on an alarm – press the button once
To turn off the actuated security system (siren), press the disarming mode
button on the keyfob.
Accidental click protection is available on the SpaceControl with firmware
version 5.54.1.0 and higher.
Operational Indication
The key fob reports its status only after any button is pressed.
Type and color of indication of the key fob display depends on the firmware
version of the device. You can find out the firmware version in the Ajax
application Devices If key fob. Information about the firmware version is
displayed at the very bottom.
Firmware version 3.18 and higher
The central LED lights up red briefly
| security system is too far away and cannot
receive the command
---|---
Two LEDs next to the button light up green twice . Then 4 key fob LEDs blink
green 6 times| The key fob has been removed from the security system devices
The central LED lights up green for a few seconds| Linking a key fob to the
security system
Firmware version 3.18 and higher
The central LED lights up green for approximately half a second
| The system has executed the key fob command
Firmware version 3.18 and higher
The central LED lights up red for approximately half a second
| The system has not executed the key fob command – integrity verification is enabled in the system and one of the devices is faulty
What is system integrity check?
Firmware version 3.16 and lower|
After the main indication, the central LED lights up green once and gradually
goes out| The key fob battery needs replacement. In this case, the key fob
commands are delivered to the security system.
Firmware version 3.18 and higher|
| Battery replacement
After the main indication, the central LED lights up red once and goes out
gradually|
Firmware version 3.16 and lower Continuous short flashes of green light
Firmware version from 3.18 to 3 . 52
Continuous short flashes of red when a key fob with firmware version from 3.18 to 3.52 is used.
Key fobs with firmware version 3.53 and latest do not function when the battery charge level is unacceptably low, do not communicate commands to the hub, and do not notify with LED
| The battery charge level is unacceptably low. The battery needs replacement.
In this operation mode, the key fob commands are not delivered to the security system.
Battery replacement
Connecting the key fob to the Ajax Security System
Connection to hub
Before starting connection:
- Following the hub instruction recommendations, install the Ajax application on your smartphone. Create an account, add the hub to the application, and create at least one room.
- Go to the Ajax application.
- Switch on the hub and check the internet connection (via Ethernet cable and/or GSM network).
- Ensure that the hub is disarmed and does not start updates by checking its status in the mobile application.
Only users with administrative privileges can add the device to the hub.
How to connect key fob to hub:
- Select the Add Device option in the Ajax application.
- Name the device, scan/write manually the QR Code (located inside the body, on the battery fixture and packaging), and select the location room.
- Select Add – the countdown will begin.
- Simultaneously press the button for armed mode and the panic button -the key fob will blink with the central LED. For the detection and interfacing to occur, the key fob should be located within the coverage area of the wireless network of the hub (at a single protected object).
The key fob connected to the hub will appear in the list of devices of the hub in the application.
Connecting the key fob to Third Party Security Systems
To connect the key fob to a third party security central unit using the Ajax
uartBridge or Ajax ocBridge Plus integration module, follow the
recommendations in the manual of the respective device.
States
1. Devices
2. SpaceControl
| Parameter | Value |
|---|---|
| Battery Charge | Battery level of the device. Two states available: |
• OK
• Battery discharged
How battery charge is displayed in Ajax apps
Accidental click protection| Indicates the method of protection against accidental clicks:
• Off
• Long press
• Double click
The function is available on key fobs with firmware version 5.54.1.0 and higher
|
Temporary Deactivation| Displays the status of the device: active or
completely disabled by the user
---|---
Firmware| Firmware version of the key fo b. It is not possible to change the
firmware
Device ID| Device identifier
Setting Up the key fob
1. Devices
2. SpaceControl
3. Settings
| Setting | Value |
|---|---|
| First field | Device name, can be edited |
| Room | Selecting the virtual room to which the device is assigned |
| Arming/Disarming Permission | Selection of a security group that the key fob |
manages . You can select All groups or a single group.
Configuration is available only after group mode activation
User| Selection key fob user.
Key fob is unassigned :
• Key fob events are sent to Ajax apps under the key fob name .
• Security mode management rights are determined by key fob settings.
|
---|---
Panic| Turning on/off the panic button
Accidental click protection| Choosing the method of protection against
accidental clicks:
• Off – protection is turned off
• Long press – in order for the key fob to transmit the command to the hub, you should hold the button down for more than 1.5 seconds
• Double press – in order for the key fob to transmit the command to the hub, you should double-press on the button with a pause of no more than 0.5 seconds
The function is available on key fobs with firmware version 5.54.1.0 and higher
Alert with a siren if panic button is pressed
| If active, Ajax sirens are activated after panic button pressing
User Guide| Opens the device User Manual
Temporary Deactivation| Allows a user to deactivate the device without
deleting it from the system. The device will not execute system commands and
participate in automation scenarios. The panic button of a deactivated device
is disabled Learn more about device temporary deactivation
Unpair Device| Disconnects the device from the hub and deletes its settings
Key fob Maintenance and Battery Replacement
The pre-installed battery provides up to 5 years of operation of the key fob during normal use (one arming and disarming of the security system per day). More frequent use can reduce battery life. You can check battery level at any time in the Ajax app.
Keep new and used batteries away from children. Do not ingest battery, Chemical Burn Hazard.
The pre-installed battery is sensitive to low temperatures and if the key fob
is significantly cooled, the battery level indicator in the app may show
incorrect values until the key fob gets warm.
The value of the battery level is not updated regularly, but only after
pressing one of the buttons at the key fob.
When the battery is discharged, the user will receive a notification in the Ajax app, and the key fob LED will slowly light up and go out red each time the button is pressed (key fobs with firmware version 3.16 and lower light up green).
How long Ajax devices operate on batteries, and what affects this Battery replacement
Tech Specs
| Compatibility | operates with all Ajax extenders, oc Bridge Plus, uartBridge |
|---|---|
| Effective radiated power | 6.01 dBm/ 3.99 mW (limit 20 mW) |
| Modulation of the radiosignal | GFSK |
| Radio signal range | Up to 1,300 m (any obstacles absent) |
| Power supply | 1 battery CR2032A, 3 V |
| Service life from the battery | Up to 5 years (depending on the usage |
frequency)
Operating temperature range| From -25°C to +50°C
Operating humidity| Up to 95%
Overall dimensions| 65 x 37 x 10 mm
Weight| 13 g
Service life| 10 years
Certification| Security Grade 2, Environmental Class Ill in conformity with
the requirements of EN 50131-1, EN 50131-3, EN 50131-5-3
Complete Set
1. SpaceControl
2. Battery CR2032 (pre-installed)
3. Quick Start Guide
Warranty
Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY
User Agreement
Technical support: support@ajax.systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>