NOVUS NVS-3316SP 16-Port PoE+ Switch User Guide
- June 8, 2024
- Novus
Table of Contents
NVS-3316SP 16-Port PoE+ Switch
User Guide
NVS-3316SP
INFORMATION
THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIMENT AND OF THE COUNCIL of 26
February 2014 on the harmonisation of the laws of the Member States relating
to electromagnetic compatibility (OJ L 96, 29.3.2014, p. 79–106, with changes)
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26
February 2014 on the harmonisation of the laws of the Member States relating
to the making available on the market of electrical equipment designed for use
within certain voltage limits.
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4
July 2012 on waste electrical and electronic equipment (WEEE) (OJ L 197,
24.7.2012, p. 38–71,with changes)
DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8
June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (OJ L 174, 1.7.2011, p. 88–110, with
changes)
COMMISION DELEGATED DIRECTIVE (EU) 2015/863 of 31 March 2015 amending
Annex II to Directive 2011/65/EU of the European Parliament and of the Council
as regards the list of restricted substances
DIRECTIVE (EU) 2017/2102 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of
15 November 2017 amending Directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and electronic equipment
Information
The device, as a part of professional CCTV system used for surveillance and
control, is not designed for self installation in households by individuals
without technical knowledge.
Excluding of responsibility in case of damaging data on a disk or other
devices:
The manufacturer does not bear any responsibility in case of damaging or
losing data on a disk or other devices during device operation.
WARNING!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT DESCRIBED FOR THE GIVEN PRODUCT IN
USER’S MANUAL AND OTHER DOCUMENTS DELIVERED WITH THE PRODUCT, OR IF IT DOES
NOT ARISE FROM THE USUAL APPLICATION OF THE PRODUCT, MANUFACTURER MUST BE
CONTACTED UNDER THE RIGOR OF EXCLUDING THE MANUFACTURER’S RESPONSIBILITY FOR
THE RESULTS OF SUCH AN ACTION.
WARNING!
THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A PROPER DEVICE
OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE YOURSELF WITH THE MANUAL
PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.
WARNING!
USER IS NOT ALLOWED TO DISASSEMBLE THE CASING AS THERE ARE NO USER-SERVICEABLE
PARTS INSIDE THIS UNIT. ONLY AUTHORIZED SERVICE PERSONNEL MAY OPEN THE UNIT
INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE PERSONNEL
AND SHOULD CONFORM TO ALL LOCAL REGULATIONS
IMPORTANT SAFEGUARDS AND WARNINGS
-
Prior to undertaking any action please consult the following manual and read all the safety and operating instructions before starting the device.
-
Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary;
-
All the safety precautions referred to in this manual should be strictly followed, as they have a direct influence on user’s safety and durability and reliability of the device;
-
All actions conducted by the servicemen and users must be accomplished in accordance with the user’s manual;
-
The device should be disconnected from power sources during maintenance procedures;
-
Usage of additional devices and components neither provided nor recommended by the producer is forbidden;
-
Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.) is not recommended since it may lead to heat build-up and damaging the device itself as a consequence;
-
Mounting the device on unstable surface or using not recommended mounts is forbidden. Improperly mounted switch may cause a fatal accident or may be seriously damaged itself. Switch must be mounted by qualified personnel with proper authorization, in accordance with this user’s manual;
-
Device should be supplied only from a power sources whose parameters are in accordance with those specified by the producer in the device’s technical datasheet. Therefore, it is forbidden to supply the switch from a power sources with unknown parameters, unstable or not meeting producer’s requirements;
-
Signal and power cables should be placed in a way excluding the possibility of damaging them by accident. Special attention must be paid to cables getting from the switch and connecting the power supply;
-
Electric installation supplying the device should be designed to meet the specifications given by the producer in such a way that overloading is impossible;
-
User can not repair or upgrade the equipment himself. All maintenance actions and repairs should be conducted only by qualified service personnel;
-
Unplug the switch from the power source immediately and contact the proper maintenance department when the following occurs:
• Damages to the power cord or to the plug itself;
• Liquids getting inside the device or exposure to strong mechanical shock;
• Device behaves in a way not described in the manual and all adjustments approved by the manufacturer and possible to apply by user himself, seem not to have any effect;
• Switch is damaged;
• Atypical behaviour of the switch components may be seen (heard). -
In necessity of repairs attention to using only original replacement parts (with their parameters in accordance with those specified by the producer) should be paid. Non-licensed service and nongenuine replacement parts may cause fire or electrocution;
-
After maintenance activities tests should be run to ensure proper operation of all the functional components of the device.
Due to the product being constantly enhanced and optimized, certain parameters
and functions described in the manual in question may change without further
notice.
We strongly suggest visiting the
www.novuscctv.com/en website in order to access
the newest manual
FOREWORD INFORMATION
1. PACKAGE CONTENTS
- 16 port PoE+ Switch,
- Power cord
- User’s manual.
- Rack mount accesories
2. MAIN CHARACTERISTICS
- 16 x 10/100 Mbps PoE+ ethernet ports support IEEE 802.2af/at standards, it can provide 30W consumption and power supply to the big consumption camera with infrared or heater.
- Provide 2 x Combo 1000Mb/s UPLINK ethernet port + 1000Mb/s SFP UPLINK they can be connected with NVR and other high bandwidth device.
- Fast and easy installation.
FEATURES AND SPECIFICATION
3. SPECIFICATION
GENERAL
Device Type| PoE+ Switch
NETWORK
Ports| PoE+ Ports: 16 x 10Mb/s / 100Mb/s (the number of ports simultaneously
operating with PoE + mode is limited by PoE budget ),
Uplink Combo x 2 :SFP(1Gb/s)+12145(1Gb/s)
PoE standards| IEEE802.3 af, IEEE802.3 at
PoE modes| Endspan (1,2+ / 3,6-)
Switching capacity| 7.2 Gb/s
Protocols Support| IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab
1000BASE-T, IEEE 802.3z 1000BASE-SX/LX
MAC ADDRESS list| 16K
FUNCTIONS
CCTV| Extended mode switch that increases the data and power transmission
distance up to 200m (Using 10Mb/s bandwidth)
Additional operating modes| VLAN, Extended
INSTALLATION PARAMETERS
RACK Mount 19″| 1U
Case| Metal, color navy blue
Dimensions (mm)| 320 (W) x 44 (H) x 207 (L)
Weight| 2.4 kg
Input Voltage| 100 — 240 VAC, 50/60Hz
Power Consumption| 210 W (maximum)
PoE Budget| 200 W for ports 1 to 16, up to 30 W for one port
Operating Temperature| 0°C — 40°C
LOCATION AND FUNCTION OF THE SWITCH COMPONENTS
4. POSITION AND FUNCTIONS OF SWITCH COMPONENTS
A. Status LED
B. Combo UPLINKS SFP + RJ45 10/100/1000 Mb/s
C. RJ45 10/100 Mb/s PoE+
D. Mode Switch:
– Switch – Standard switch mode
– VLAN – Creates a Vlan between PoE port
– Extend – Enables extended range mode on PoE ports (at 10Mb/s bandwidth)
Back E. Ground
F. Power connector
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
431 Pulawska St., 02-801 Warsaw, Poland
tel.: +4822 546 0 546, kontakt@aat.pl
www.novuscctv.com
References
- NOVUS Professional solution for your security systems | Video surveillance (CCTV), Access control
- NOVUS Professional solution for your security systems | Video surveillance (CCTV), Access control
- NOVUS Profesjonalne rozwiązanie dla systemów zabezpieczeń | Telewizja przemysłowa CCTV, Kontrola dostępu