AJAX Hub 2 Wireless Intelligent Security System Control Panel User Guide
- June 8, 2024
- ajax
Table of Contents
Model name:
Ajax Hub 2 (4G) (9NA/AFA)
Quick Start Guide
Hub 2 Wireless Intelligent Security System Control Panel
Before using the device, we strongly recommend reviewing the User Manual on
the website.
Product name: Security control panel
The Hub 2 (4G) intelligent control panel is a key element of the Ajax security
system. The device monitors the operation of all Ajax detectors and instantly
sends an alarm signal to a central monitoring station and users.
| Operating frequencies | 905-926.5 MHz FHSS |
|---|---|
| RF Power Density | |
| Short-range device | 0.0003 mW/cm2 |
(Limit 0.60 mW/cm2)
LTE| 0.1 mW/cm2 (Limit 1.0 mW/cm2)
Radio signal range| up to 6,500 ft (line-of-sight)
Ethernet| 10/100 Mbps
Communication channels| WCDMA: (B2/B4/B5 bands) LTE1(132/134/1312 bands)
Power supply| 110-240 V∼
Backup battery| Li-Ion 2 Ah (up to 38 hours of autonomous operation)
Operating temperature range| from 14° to 104°F
Operating humidity| up to 75%
Dimensions| 6.42 x 6.42 x 1.42
Weight| 12.78 oz
¹LTE-FDD B2 does not support Rx-diversity
Complete Set :
- Hub 2 (4G);
- SmartBracket mounting panel;
- Power supply cable;
- Ethernet cable;
- Installation kit;
- GSM card (depends on the sales region);
- Quick Start Guide.
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body: use only the supplied antenna.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains a licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
To maintain compliance with ISED’s RF Exposure guidelines, This equipment
should be installed and operated with a minimum distance between 20 cm of the
radiator and your body: Use only the supplied antenna.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Warranty: Warranty for Ajax devices is valid for two years after the
purchase date and does not apply to the supplied battery. If the device does
not work correctly, you should first contact the support service—in half of
the cases, technical issues can be solved remotely!
The full text of the warranty is available on the website:
ajax.systems/warranty.
User Agreement: ajax.systems/end-user-agreement.
Technical support: support@ajax.systems
Manufacturer: “AS Manufacturing” LLC.
Address: 5 Sklyarenka Str., Kyiv, 04073, Ukraine.
www.ajax.systems
The importer’s name, location, and contact details are indicated on the
package. The manufacturing date is indicated on a round sticker at the bottom
of the box.
http://ajax.systems/support/devices/hub-2-4g
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>