Mircom TX3-PL-ENCL Postal Lock Enclosure User Manual
- June 8, 2024
- Mircom
Table of Contents
Mircom TX3-PL-ENCL Postal Lock Enclosure
Operation
The TX3-PL-ENCL Post Office Lock Enclosure permits the postal worker to use their key to enter the building (when used with Post Office supplied lock).
Dimensions
There are two knockouts: one on the back and one on the bottom.
Installation
- Place the postal lock into the postal lock enclosure and secure it with the two nuts provided. Ensure that it engages the postal lock switch.
- Connect the 2 wires (22 AWG) from the postal lock switch to the access control unit. See the control unit’s documentation for instructions.
- Use four fasteners to secure the postal lock enclosure to the wall.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>