PHILIPS RC530B TrueLine Recessed Light Instruction Manual
- June 8, 2024
- Philips
Table of Contents
PHILIPS RC530B TrueLine Recessed Light Instruction Manual
What in the box
Symbol
Lumen package| Lamp color| Optics| Driver| Power [W] +/-1 0 %|
Efficiency class| Lumen package| Lamp color| Optics| Driver| Power [W]
+/-1 0 %| Efficiency class
---|---|---|---|---|---|---|---|---|---|---|---
31/43/50| 930940| OC| PSD| 26,5/35/41| E| 19| 930940| NOC| PSD| 21,5| F
15/19/25/3134/40/43| OC| POE| 13,3/16/20,4/24,527,3/32/33,8| 19| OC| PSD| 17,7
31| NOC| PSD| 33,3
| 15/19/25/31| NOC| POE| 16,6/20/26,3/31,8
Minimal build-in dimensions to avoid overheat [mm]
| 4ft| 5ft
---|---|---
Height| 120| 120
Width| 400| 400
Length| 1400| 1700
The luminaire shell under no circumstance, covered with thermal insulation
matting or similar mate.
Package Contents
Installation
Manufacturer| Unit| Power| Duration| Number of cell| Nominal voltage| Luminous
ux
---|---|---|---|---|---|---
Philips| TrustSight 3.2V 3cell 4500mAh battery LFP| 2 W| 3 h| 3| 3.2 V| 310 lm
Inrush current
Electrical
characteristics
| PSD
---|---
Imax [A]| 25
Tref [µs]| 200
MCB Luminaire max.| **** PSD
B-4A| 5
B-6A| 8
B-10A| 12
B-13A| 16
B-16A| 20
B-20A| 25
B-25A| 31
B-32A| 40
B-40A| 50
C-4A| 8
C-6A| 12
C-10A| 21
C-13A| 27
C-16A| 34
C-20A| 41
C-25A| 52
C-32A| 68
C-40A| 83
Rated lumen in emergency mode for OC 310lm.
**Rated lumen in emergency mode for NOC 230lm.
The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced.
**
Given the choices made in this
unique lighting concept, there are a few instructions regarding the
maintenance.
-
Given the choices made in this unique lighting concept, there are a few instructions regarding the maintenance.
-
Prevent water from entering on or in the luminaire at installation and during use of the luminaire
-
During installation or maintaining the luminaire please use gloves to avoid spots on the cover.
-
Do not clean with a dry cloth as it will cause the product to attract dust. Dirty spots can be removed:
Only dust: use a damped cloth (no dripping water),preferably anti-static.
Fingerprints etc: use a damped cloth (no dripping water) with a cleaner
approriate for polycarbonate/PMMA plastics -
Do not touch electronic components as they are ESD sensitive.
-
Do not stare into LED beam.
-
Luminaire should not be used for illumination during building activities due to dust accumulation inside the luminaire.
LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 2M LASER PRODUCT 210J/M2 /10S 443.533.552nm wg PN-EN 60825-1 -2005
Scan me!
Register me!
To get an overview of all spare parts for a luminaire, please refer to
detailed instructions in the service manual available via the Signify Service
tag apps (Android and iOS).
Disconnect before servicing
Luminaire has basic insulation between Low Voltage supply and control conductors.
The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
This product contains a light source of energy efficiency class: see table or label. © 2022 Signify Holding All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Signify Holding. The Netherlands
