Miller H700 Full Body Harness Instruction Manual
- June 5, 2024
- Miller
Table of Contents
Miller H700 Full Body Harness Instruction Manual
Description
The Honeywell Miller MODULAR LIGHTWEIGHT ACCESSORY STRAPS (MLAS) is a practical low profile textile interface that allows convenient attachment of MODULAR LIGHTWEIGHT LOAD-CARRYING EQUIPMENT (MOLLE) certified accessories to your waist pad.
Training
It is essential that the users of this equipment receive proper training, including detailed procedures for the safe use of such equipment in their work application.
Warning
- Include the MLAS during the daily harness inspection before use. Check for damage, wear, fraying, cuts, abrasion, burns and knots. When inspection reveals defects or damage, the equipment shall be tagged as “unusable,” removed from service, and immediately discarded.
- ALWAYS use BOTH rows when attaching a MOLLE certified accessory (follow the instructions for use provided with the MOLLE accessory). See below the installation procedure.
- The maximum total weight capacity of the Honeywell Miller MLAS shall not exceed: 22 lbs. / 10 kg
- All persons using this equipment must read, understand, and follow the instructions for use. Failure to do so may result in the MOLLE accessory falling off.
- Please only use the MOLLE certified accessories.
- All tools or objects placed inside the MOLLE pouches or accessories should preferably be tethered to avoid any risk of fall.
- To keep shoulder straps in working position during a free fall, waist belt or back strap, at least one of which remains engaged to meet standard requirements.
Example of Attaching a MOLLE Accessory to the MLAS
-
STEP 1: Insert the MOLLE straps through the first row on the MLAS and pull through
-
STEP 2: Go down the straps through the first row on the MOLLE accessory
-
STEP 3: Insert the straps through the second row on the MLAS and pull through
-
STEP 4: Go down the straps through another row on the MOLLE accessory
-
To finish the procedure, secure the snap button on MOLLE accessory
Removing the waist belt
To start removing your waist belt, please take the webbing end out from the
side D ring (show on below picture).
Reminder: All the webbing loops or slots you take off from removal shall
be reinserted when you install the waist belt.
Please contact our service team or scan below QR code if you have any question about removing or installing the waist belt.
Scan to learn more about H700 harness