ROYAL GOURMET PD1301R Red 3-Burner Liquid Propane Gas Grill Owner’s Manual
- June 8, 2024
- Royal Gourmet
Table of Contents
PD1301R Red 3-Burner Liquid Propane Gas Grill
Owner’s Manual
FOR YOUR SAFETY
Use outdoors only!
Read the instructions before assembling and using the appliance.
CONTACT US FIRST!
If you have any questions that are not addressed, please contact us first.
https://www.facebook.com/Royal-Gourmet-879976522153340/
1-800-618-6798
service@royalgourmetusa.com
Learn more at
www.royalgourmetcorp.com
DANGER
If you smell gas:
- Shut off gas supply to the griddle.
- Extinguish any open flame.
- If odor remains, keep away from the griddle and immediately call your fire department.
NOTE: Read all instructions prior to assembly and use. Failure to follow the instructions in this manual could result in bodily injury and/or property damage.
WARNING
- The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54.
- Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
- An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
In case of any issue, call us first! DO NOT return the griddle to the retailer. This griddle has been made to high quality standards. If you have any questions not addressed in this user’s manual, or you need parts, please call our customer service hotline.
CAUTION
- The gas griddle is meant for use with propane gas only (propane gas cylinder not included).
- Never use charcoal or lighter fluid with gas griddle.
- Never attempt to attach this griddle to the self-contained propane system of a camper trailer, motor home, or house.
- DO NOT use gasoline, kerosene, or alcohol for lighting. This griddle is not intended to be used in or on recreational vehicles or boats. This appliance is not intended for commercial use.
- Children should never use your griddle. Keep children and pets away when in use.
- DO NOT attempt to move the griddle while it is lit or hot. DO NOT alter the griddle in any manner.
- DO NOT use the griddle unless it is completely assembled, and all parts are securely fastened and tightened.
- DO NOT use the griddle or any gas products near unprotected combustible buildings and materials.
- DO NOT use in the presence of gases or vapors. Keep the griddle area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.
- DO NOT touch metal parts of the griddle until it has completely cooled (about 45 minutes) to avoid burns, unless you are wearing protective gear (oven mitts, potholders, etc.).
- Keep the griddle at least 91 cm (36 inches) from any wall or surface at all times. Maintain at least 10 feet clearance to combustible objects that can catch fire.
- Do not operate this appliance under any overhead roof construction or foliage.
- Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks, the hose must be replaced before operating the griddle. The replacement hose assembly must be as per the manufacturer specifications specified by the manufacturer.
- Move the gas hose as far away as possible from hot surfaces and dripping hot grease.
- Never keep a filled LP gas cylinder in a hot car or truck. Heat may cause the gas pressure to increase, which may cause the relief valve to open and allow the gas to escape.
- Keep the griddle’s valve compartment, burners, and circulating air passages clean. Inspect the griddle before each use. When cooking with oil/grease, do not allow the oil/grease to exceed 177 °C (350 °F).
- Do not obstruct the air flow for combustion and ventilation.
- Keep the ventilation openings of the cylinder enclosure free and clear from debris.
- Please keep this Owner’s Manual for future reference.
All CALIFORNIA PROPOSITION 65 WARNINGS
- Fuels used in gas burning appliances and the combustion byproducts of such fuels, can expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm.
- This product contains Nickel (Metallic) known to the State of California to cause cancer.
- This product contains Lead and Lead Compounds known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to: www.P65Warnings.ca.gov
WARNING
- This griddle is for Outdoor Use Only and should not be used inside a building, garage, or any other enclosed space.
- The consumption of alcohol, prescription, or non-prescription drugs may impair the operators’ ability to properly assemble or safely operate the griddle.
- Always place your griddle on a hard and level surface far away from combustibles.
- Do not leave a lit griddle unattended. ALWAYS keep children and pets away from the griddle.
- Do not use the griddle in high winds.
- Do not use the griddle to cook excessively fatty meat or other fatty or greasy food where there is risk of flare-ups.
ADANGER: LP CYLINDER RISK
iquid propane gas is flammable and hazardous if handled improperly.
Understand the characteristics before using any propane product.
- Propane characteristics: Flammable, explosive under pressure, heavier than air, settles in pools and low areas.
- In its natural state, propane has no odor. For your safety, an odorant has been added.
- Contact with propane can cause freeze burns to the skin.
- This griddle is shipped from the factory for use with propane gas only.
- Never use a propane cylinder with a damaged body, valve, collar, or footing.
- Dented or rusted propane cylinders may be hazardous and should be checked by your propane gas supplier.
FOR YOUR SAFETY
- Keep the griddle at least 91 cm (36 inches) away from side and back, and 61 cm (24 inches) from floor to combustible and noncombustible materials and construction. Maintain at least 10 feet clearance to combustible objects that can catch fire.
- Do not place the griddle where there are combustible surfaces overhead.
General Information and Instructions
INSTRUCTIONS FOR USE
Follow the instructions carefully to avoid seriously damaging your griddle and
causing injury to yourself and to property.
- Assemble the griddle as per the assembly instructions carefully.
- Connect the LP cylinder ( not included) to the griddle.
- Turn all control knobs to the OFF position before turning on the gas supply to the griddle.
- Operate the regulator in accordance with the instructions supplied with the regulator.
LP GAS AND CYLINDER INFORMATION
Your new gas griddle operates on LP (Liquified Petroleum) Gas. It is odorless,
colorless, and non-toxic when produced.
You can smell LP gas as it has been given an odor similar to rotten eggs for
your safety.
The LP cylinder used with your griddle must have two features:
- An OPD (Overfill Protection Device) that prevents accidental gas leaks caused by overfilling of the cylinder. Each cylinder contains a float that closes the input value when the cylinder is 80% full. This allows room or the propane gas to expand in hot temperatures. A triangular hand wheel distinguishes this type of cylinder.
- An QCC1 Type1 Quick Connect Valve that provides fast cylinder hook-ups and requires only to be tightened by hand.
TRANSPORTATION AND STORAGE
-
The LP cylinder must include a collar to protect the gas supply valve.
-
Do not store a spare LP cylinder under or near the griddle.
-
Never fill the LP cylinder beyond 80% capacity.
-
If the warnings 2 and 3 above are not heeded exactly, a fire causing death or serious injury may occur.
-
Always transport in an upright position.
-
Do not smoke when transporting your LP cylinder.
-
Place a dust cap on the cylinder gas valve outlet whenever the cylinder is not in use. Use only the type of dust cap that is provided with the cylinder valve when purchased. Other types of cap or plugs may result in leakage of propane.
CYLINDER SPECIFICATIONS
- Cylinder purchased or exchanged for your gas griddle must be manufactured and marked in accordance with the specifications for LP Gas cylinder of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and Commission, be equipped with a listed over-filling prevention device (OPD), and be equipped with a cylinder connection device compatible with connection for outdoor cooking appliances.
- The LP gas cylinder used for this appliance must not have a capacity exceeding 20 lb. (9.1 kg). Approximately 18″ (45.7cm) high and 12″ (30.5cm) diameter.
- This griddle is designed to fit Worthington, Manchester, or SMPC brand 20 lb. (9.1 kg) cylinders. Other brands may fit this griddle if the top collar and bottom support ring have similar dimensions.
THE CYLINDER MUST ALSO BE EQUIPPED WITH:
- A shut-off valve terminating in a Type 1 gas cylinder valve outlet
- A Type 1 valve that prevents gas flow until a positive seal is made
- A collar to protect the cylinder shut-off valve
- A safety relief device that is directly linked with the vapor space of the cylinder
WARNING
A frosty cylinder valve indicates possible gas overfill. Close the LP valve
and call your LP dealer immediately.
- DO NOT connect this griddle to an existing #510 POL cylinder valve with left-hand threads. The Type 1 valve can be identified by the large external threads on the valve outlet.
- DO NOT connect to a propane cylinder exceeding this capacity.
- DO NOT connect to a cylinder that uses any other type of valve connection device.
CONNECTING REGULATOR TO LP CYLINDER
CAUTION
Only use the gas pressure regulator provided with this outdoor cooking
appliance. This regulator is set for an outlet pressure of 11 inches of water
column.
Your regulator is equipped with a QCC Type 1 quick connect system. It does not
allow gas to flow until a positive seal has been made. It has a thermal
element that will shut off the gas flow if the temperature reaches 115 °C
(240 °F). It also has a flow-limiting device that restricts the flow of gas to
0.28 cubic metrics per hour (10 cubic feet per hour).
- Make sure the LP cylinder is OFF by turning the hand wheel clockwise until it stops.
- Be sure all burner controls are turned to the OFF position.
- Remove the safety cap from the cylinder valve.
- Center the regulator nipple into the cylinder valve.
- Turn the coupling nut clockwise until it stops. Hand tighten Only. Do not use a wrench.
WARNING
- Do not connect this griddle to any unregulated sources of propane.
- Before each use, check the gas hose for excessive abrasion, wear, or cuts. Replace a damaged hose assembly with the one specified in the parts list before using the griddle.
- Always perform the Leak Test listed below before using your griddle for the first time, if the cylinder has been changed, if any gas supply components have been changed, if the regulator flow-limiting device has been activated, or after a long period of non-use.
- Do not attempt to connect this griddle to the LP system of a motor home or trailer.
LP CYLINDER LEAK TEST
- Leak test must be repeated each time the LP cylinder is exchanged or refilled.
- DO NOT smoke or have anything nearby that can easily ignite, such as lighters or matches.
- DO NOT use an open flame to check for gas leaks.
- The appliance must be leak checked outdoors in a well-ventilated area away from open flames or sparks.
- REMOVE any pots or other cookware from the burner before beginning the test.
STEPS FOR LEAK TEST:
Use a clean paint brush and 50/50 soap and water solution.
NOTE: Use a mild soap and water. DO NOT use household cleaning agents, which
could damage the gas component.
-
Turn all burner control knobs, regulator and cylinder valves OFF.
-
Be sure regulator is tightly connected to LP cylinder.
-
Completely open LP cylinder valve by turning hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately. There is a major leak at the connection. Correct before proceeding.
-
Brush the soapy solution onto all metal seams and the entire valve area as shown in figure below.
-
Slowly turn the LP cylinder valve counterclockwise to the open position.
-
A leak is identified by a flow of bubbles from the area of the leak. Close LP cylinder valve immediately and retighten connections.
-
If leaks cannot be stopped, do not try to repair, contact your gas griddle dealer for assistance. Do not attempt to operate appliance if a leak is present.
-
Always examine the hose for any damage. If damage is observed, do not attempt to patch the hose.
Replacing the hose is the only safe option. -
For assistance with any malfunction related to the LP cylinder, regulator or hose, contact customer service.
-
Always close LP cylinder valve after performing leak test by turning hand wheel clockwise.
UNDER NO CIRCUMSTANCE SHOULD THE VALVE REMAIN IN THE ON POSITION FOR MORE THAN 12 SECONDS.
WARNING
- DO NOT USE THE GRIDDLE if there are leaks. Be sure the LP cylinder valve is closed. If the LP cylinder is still leaking, contact your LP dealer or call 911.
- Do not use any matches, open flames, or smoke during leak testing.
- Do not light any burners during leak testing.
- Replacement parts, including a replacement hose assembly, must be as per the specifications in the parts list.
Failure to comply with these instructions may result in serious bodily injury.
Each griddle burner is tested and calibrated at the factory prior to shipment; however, variations in the local gas supply may make it necessary to adjust the burners. Please visually check the flames of the burners. Always visually inspect your griddle before lighting. Replace any hose that is frayed or cracked. Look for anything that could block ventilation and remove such a blockage or move the griddle. After lighting, check the flame pattern to ensure you have even heat distribution for each burner. If burners don’t light up, or if the flame pattern is uneven, see the Troubleshooting section.
WARNING: BEFORE LIGHTING
- Read the instructions before lighting.
- If the burner does not ignite in 5 seconds, turn the burner control knob(s) off, wait 5 minutes and repeat the lighting procedure.
- Inspect the gas supply hose prior to turning the gas “ON”. If there is evidence of cuts, wear, or abrasion, it must be replaced prior to use. Do not use the griddle if the odor of gas is present. Only use the pressure regulator and hose assembly supplied with the unit.
- Never use regulators and hose assemblies other than those supplied with the griddle. If a replacement is necessary, contact the manufacturer to get the proper replacement. The replacement must be as per the specifications in the Owner’s Manual. DO NOT LEAVE THE GRIDDLE UNATTENDED WHILE COOKING.
LIGHTING THE BURNERS USING PIEZO IGNITION
- Turn ALL control knobs to OFF position.
- Turn gas supply on at LP cylinder valve or at regulator.
- Push in control knob and turn it anti-clockwise to HI position. Push and hold ignitor button to light the burner.
- If the burner does not ignite, turn control knob to OFF position, wait for
- minutes before attempting to relight the burner.
- If the burner ignites, repeat for other burners, and turn the control knobs to the temperature setting required for your food.
- Should the burner still fail to ignite, check the gas supply.
MANUALLY LIGHTING THE BURNERS WITH MATCH STICK
-
Turn ALL control knobs to OFF position.
-
Turn gas supply on at LP cylinder valve or at regulator.
-
Remove the cooking griddle and place the lit match close to the burner ports4. Push in the control knob and turn it anti-clockwise to HI position.
The burner should light immediately. -
If the burner does not ignite, turn control knob to OFF position, wait for 5 minutes before attempting to relight the burner.
-
If the burner ignites, repeat for other burners, and turn the control knobs to the temperature setting required for your food.
-
Replace cooking griddle. Make sure to wear protective gloves, such as oven mitts or BBQ gloves.
- Should the burners still fail to ignite, check the gas supply.
TURNING OFF YOUR GRIDDLE
- Turn off the gas supply at the LP cylinder by turning the valve clockwise to a full stop.
- Turn all burner control knobs to OFF position.
WARNING
Do not use spirit or petrol for lighting or re-lighting!
BURNER FLAMES
Always check the burner flame patterns after lighting. A good flame should be
primarily blue with a yellow tip and have a minimal amount of flicker. Some
yellow tips are OK if they are smaller than 2.5 cm (1 “). New burners
sometimes have oil residue, which will cause yellow flame when burning off.
Variations in gas supply, altitude, weather, and other factors can all impact
burner performance. Older griddles can also show more yellow flame due to food
deposit, oil, and fat buildup. ****
SEASONING GUIDE
Seasoning your cooking griddle will help create relative non-stick surface for
cooking while also protecting it against oxidization. When you receive your
griddle it will already have a thin layer of oil applied on the griddle.
That has been done to protect the griddle from rust during shipping and
storing, that is normal.
FIRST SEASONING:
- Wash off the shipping oil by using soapy water and a towel or paper towels. Rinse off the soap and air dry.
- Next, apply some virgin olive oil or other vegetable oil on the griddle surface. Using a paper towel to rub a thin coat of oil on the entire surface of the griddle.
- Turn on your griddle at medium-high heat. The oil will eventually begin to smoke which is good. Leave it heating until the smoke stops. Turn off your griddle.
- Let the surface cool down and repeat above process for 2-3 times until you get a nice black surface on the griddle. Once you’ve completed this process, you’ll have a perfect grilling surface to get cooking on! Use long-handled barbecue utensils and oven mitts to avoid burns and splatters. Proceed to “PREHEATING”.
*After you are done using your griddle you should apply a very thin coat of cooking oil to maintain your seasoning bond and protect it from rust.
PREHEATING
It is necessary to preheat the griddle before cooking, depending on the type
of food and the cooking temperature.
Preheat the gas griddle on MEDIUM/HIGH for 5 to 10 minutes. Reduce heat as
appropriate for what you are grilling. Next, brush or spray the cooking
griddle with olive or vegetable oil to prevent food from sticking.
Your new griddle has been designed and manufactured to high quality standards.
It will provide you with many years of fun grilling time, however, it requires
a minimal amount of maintenance.
Clean griddle often, preferably after each cookout. If a bristle brush is used
to clean any of the griddle cooking surfaces, ensure no loose bristles remain
on cooking surfaces prior to grilling.
WARNING
- Do not clean any part of your griddle in a self-cleaning oven.
- Do not use oven cleaners, abrasive kitchen cleaners, cleaners that contain citrus products, or mineral spirits.
- Clean your griddle regularly to prevent grease buildup, grease fires or excessive flare-ups.
- Always allow the griddle to cool down prior to cleaning.
A Grease is flammable. Let hot grease cool down before attempting to handle
it. Avoid letting grease deposits collect in the bottom of the firebox.
COOKING GRIDDLE
Most foods can be cleaned up by scraping and wiping down the cooking griddle
with a paper towel or wet soft cloth.
To remove tough food residue, you can use a mild cream cleaner and pad. You
can also use soapy water or a paper towel and 1/4 cup of table salt as another
method to clean your griddle. Rinse well and dry it.
STAINLESS STEEL
Clean with multipurpose, low-abrasion, non-phosphorous metal or stainless
steel polish and a soft cloth. Always polish in the direction of the finish.
Do not allow grease and dirt to accumulate. In addition, several products and
naturally occurring substances can damage all stainless-steel finishes. These
include, but are not limited to, swimming pool chemicals (chlorine and
bromine), lawn and garden fertilizers, ice-melting products, sea or other salt
water, urine, bird droppings, and tree sap. Upon contact with these
substances, immediately wash and dry the stainless-steel surface and be
careful to avoid burns.
OTHER EXTERIOR SURFACES
Wash with a mild dishwashing detergent and warm water. You can use a cloth,
soft brush (non-metallic), or plastic cleaning pad. Rinse thoroughly and wipe
dry.
GREASE CUP
Check after each use. Remove and empty the grease cup when half full. It can
be washed with warm water and mild dishwashing detergent.
BURNERS
We recommend you clean your burners at least twice a year, or before use if
the griddle has not been used in over one month.
WARNING
Small insects and spiders may enter the burner tubes. Sometimes they will
build nests or spin webs that can block or reduce the amount of gas flowing
through the burner. You will usually see a smaller flame, or a flame that is
mostly yellow rather than blue, coming from the burner when this happens.
Other signs include the griddle generating uneven or low heat, or difficulty
in igniting the burners. In cases of severe blockage, this can cause the flame
to burn backwards, and outside of the burner tubes, which can damage your
griddle and/or cause personal injury. IMMEDIATELY SHUT OFF THE FLOW OF PROPANE
GAS AT THE CYLINDER BY TURNING THE HAND WHEEL CLOCKWISE SHOULD THIS HAPPEN.
Wait for the griddle to cool down and then clean all burners.
CLEANING THE BURNERS
-
Ensure the gas is turned off at the LP cylinder.
-
Remove the cooking griddle.
-
Lift each burner up and out.
-
Clean the inside of the burner using a stiff wire. A straightened coat hanger will work.
An alternative is to use compressed air. Always wear protective gear for your eyes when using this method.
Never enlarge the burner ports during cleaning. -
Brush the outer surface of the burner.
-
Ensure all ports (holes) are free of debris.
-
Inspect the burners. Replace any that have cracks or enlarged ports.
-
Replace the cooking griddle.
-
Perform the Leak Test described earlier in this Owner’s Manual.
WARNING
- Proper placement of the burner and valve is vital to ensure safety.
- Do not use any strong or grinding solvents or abrasive pads, as they can damage surfaces and leave behind scratch marks.
GRIDDLE STORAGE
- Clean your griddle before storage. Store at a cool dry place.
- Storage of a gas griddle indoors is permissible only if the LP cylinder is disconnected and removed from the gas griddle.
- A cover is highly recommended to protect your griddle. Choose from a variety of griddle covers offered by the manufacturers.
- Perform a Leak Test before using the griddle after it has been kept in storage for some time.
Troubleshooting Guide
BURNER WON’T LIGHT (USING A 9 KG (20 LB.) GAS CYLINDER)
- Ensure LP gas cylinder still has fuel in it by gently shaking it, and there will be sounds of the liquid inside if the fuel remains.
- Ensure that the gas cylinder supply valve is open (turned counterclockwise until stop).
- Check to see that the air inlet screen of the venturi tube is not covered or clogged.
- Check to see that burner orifices are clear. If obstructed, with LP gas cylinder disconnected, you can gently brush orifices with a small brush.
- Check to see that the ignitor is producing a spark against the burner (better checked in shady spot). If the burner still doesn’t ignite, repeat the above procedures with another LP gas cylinder.
GRIDDLE DOESN’T REACH HIGH ENOUGH TEMPERATURE (USING A 9 KG (20 LB.) GAS CYLINDER)
- Gently shake LP gas cylinder to ensure enough fuel for working, and there will be sounds of the liquid inside if fuel remains.
- Check to see that the air inlet screen of the venturi tube is not covered or clogged.
- Test the gas system for leaks.
There is a safety device on your gas cylinder which intends to reduce the gas
flow whenever a leak occurs.
When this device is active, it is commonly called “bypass”. This device can be
inadvertently activated if you don’t follow the proper lighting procedures.
Once you experience the low flame, you should do the following:
- Shut off the griddle.
- Fully close the cylinder pressure relief valve.
Then, restart with proper procedures:
- Ensure the control knob is turned to OFF position.
- Slowly open the gas cylinder valve fully. Turn the cylinder hand wheel about 1/4 turn every 10 seconds.
- WAIT 5 SECONDS.
- Follow the lighting steps.
If your problem is not resolved using the troubleshooting information above, please contact your local gas dealer.
BEEF INTERNAL TEMPERATURE CHART
Cooking Degree| In l Core ore
Temperature| Internal Description| Firmness
Rare| 125 °F| Center is bright red, pinkish toward the outer portion, and warm
throughout| Soft to the touch
Medium Rare| 130-135 °F| Center is very pink, slightly brown toward the outer
portion and slightly hot| Yields only slightly to the touch
Medium| 140-145 °F| Center is light pink, outer portion is brown and hot
throughout| Beginning to firm to the touch
Medium Well| 150-155 °F| Mostly brownish gray throughout with a hint of pink
in the center| .
Firm to the touch
Well Done| 155 °F and above| Steak is brownish gray throughout| Firm or hard
to the touch
POULTRY INTERNAL TEMPERATURE CHART
Whole Chicken| 165 °F| Cook until the juices run clear| Firm to the touch
Dark Meat| 165 °F| Cook until white throughout but still moist| Firm to the
touch
Breast Meat| 165 °F| Cook until white throughout but still moist| Firm to the
touch
Thigh, Wings and Legs| 165 °F| Mostly brownish gray throughout with a hint of
pink in the center| .
Firm to the touch
PORK INTERNAL TEMPERATURE CHART
Medium| 150 °F| Pink in the center|
Well Done| 160 °F and above| Pork is uniformly white/brown throughout|
Pork Ribs| 180-200 °F| Pale white. Cook medium to well done|
Raw Sausage| 160 °F| No longer pink|
Sausage (Precooked)| 140 °F| No longer pink|
Warranty and Customer Service
Thanks for purchasing this Royal Gourmet® Portable 3-Burner Gas Griddle in
Red.
Royal Gourmet warrants its products to be free from defects in materials and
workmanship under proper assembly, normal residential use and recommended care
for 1-Year Full Warranty from the date of original retail purchase. The
warranty does not cover paint finish as it may burn off during normal use.
RUST is not considered a manufacturing or materials defect.
For 5 Years from the date of purchase, any stainless steel burner that rusts
through will be replaced free of charge.
Within the stated warranty period, Royal Gourmet, at its discretion, shall
replace defective components free of charge, with the owner being responsible
for shipping. Royal Gourmet reserves the right to require that defective
parts be returned, postage and or freight pre-paid by the consumer for review
and examination. In the event of parts availability issues, Royal Gourmet
reserves the right to substitute like or similar parts that are equally
functional. Upon the expiration of such warranty, all such liability shall
terminate.
Note: A dated sales receipt along with Model Number and Serial Number will be
required for the warranty service.
The limited warranty will not reimburse you for the cost of any inconvenience,
food, personal injury or property damage. All warranty coverage is void if
this griddle is ever used for commercial or rental purposes. And this limited
warranty applies to the functionality of the product ONLY and does not cover
cosmetic issues such as scratches, dents, corrosions or discoloring by heat,
abrasive and chemical cleaners or any tools used in the assembly or
installation of the appliance, surface rust, or the discoloration of
stainless steel surfaces.
ITEMS NOT COVERED IN THE WARRANTY SERVICE
Any failures or operating difficulties due to accident, abuse, misuse,
alteration, misapplication, vandalism, improper installation or improper
maintenance or service, or failure to perform normal and routine maintenance,
including but not limited to damage caused by insects within the burner tubes,
as set out in the owner’s manual.
Deterioration or damage due to severe weather conditions such as hail,
hurricanes, earthquakes or tornadoes, discoloration due to exposure to
chemicals either directly or in the atmosphere.
Cost of service calls to your home.
Costs of removal or re-installation.
Pickup and delivery of your product.
Shipping or transportation costs.
Labor costs for installation and repair.
Liability for indirect, or consequential damages.
This limited warranty is the sole warranty given by Royal Gourmet and is in
lieu of all other warranties, expressed or implied including implied warranty,
merchantability, or fitness for a particular purpose. Neither Royal Gourmet
nor the retail establishment selling this product has authority to make any
warranties or to promise any remedies in addition to or inconsistent with
those stated above.
Royal Gourmet’s maximum liability, in any event, shall not exceed the purchase
price of the product paid by the original consumer purchaser. Some states do
not allow the exclusion or limitation of incidental or consequential damages.
In such a case, the above limitations or exclusions may not be applicable.
Do not return parts without prior to obtaining return authorization from our
customer service department.
Please do not hesitate to contact our customer service when you have any
questions regrading assembly, warranty, or accessories.
We will be happy to offer any replacement parts you need during the warranty
period.
1-800-618-6798
service@royalgourmetusa.com
****Mon-Fri, 8:30 AM-5:30 PM, EST
Documents / Resources
|
ROYAL GOURMET PD1301R Red 3-Burner Liquid Propane Gas
Grill
[pdf] Owner's Manual
PD1301R Red 3-Burner Liquid Propane Gas Grill, PD1301R, Red 3-Burner Liquid
Propane Gas Grill, Liquid Propane Gas Grill, Propane Gas Grill
---|---
|
Royal Gourmet PD1301R Red 3-Burner Liquid Propane Gas
Grill
[pdf] Installation Guide
PD1301R Red 3-Burner Liquid Propane Gas Grill, PD1301R, Red 3-Burner Liquid
Propane Gas Grill, Liquid Propane Gas Grill, Propane Gas Grill, Gas Grill,
Grill
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>