deeprio TGW101 Vidaa Smart Watch User Manual

Deeprio Vidaa
Smart Watch
User Manual

Thank you for choosing this product, please read the operating instructions carefully before using the watch

Quick start

1. Contents
   Smartwatch 1, Charging base 1, User manual 1, Warranty card 1

2. Appearance
   
   

3. Turning on/off
   • Turning on
   ①The watch automatically turns on while charging.
   Note: Please fully charge the watch before first use. Use the provided charger only Press and hold the power button.
   • Turning off

4. Turning off procedure: Settings>>System Operation>>Shutdown

Power button functions
Short press

1. On the dial screen, short press the power button to enter the application list In the application list, short press the power button to return to the main dial When the screen  goes off, short press the power button to light up the screen

Press and hold

1. When the watch is off, press and hold the power button to turn it on
2. In the power-on state, press and hold the power button to enter the system menu

On-screen operation
Swipe up and down

1. Swipe up to see quick settings,
2. wipe down to see recent messages.
   Review long text/detailed information

Swipe left and right

1. Swipe left/right to cycle through the apps and functions on the watch

Single-tap on the screen

1. Enter the app/function displayed on-screen
2. Tap on-screen buttons within apps to perform displayed actions

Change the wristband
To remove a wristband:

1. Turn over the watch and find the quick-release lever.
2. While pressing the quick-release lever inward, gently pull the wristband away from the watch to release it.

To attach a wristband:

1. To attach a wristband, hold the band at a 45° angle to the watch, and slide the pin (the side opposite the quick-release lever) into the notch on the watch.
2. While pressing the quick-release lever inward, slide the other end of the wristband into place.
3. When both ends of the pin are inserted, release the quick-release lever.

Downloading and pairing

http://appapi-aws.oyvfit.cn/downloadApp.html?appName=Deeprio

1. Download the app
   Scan the QR code to download the Deeprio App or search “Deeprio” in the App store to download and install.

2. Pairing
   Use the Deeprio app on your phone to pair it with your watch.
   

Functions

1. Sports activity tracking
   Deeprio Vidaa has various sports modes. Tap the sports icon on the watch to enter the corresponding sports mode. In the sports mode, the watch will record your exercise time, distance, steps, heart rate, and other information to help you get the most from your workout.

2. Health monitoring
   Deeprio Vidaa has various health monitoring functions such as heart rate monitoring, blood oxygen monitoring, and sleep monitoring.

Heart rate monitoring: Swipe to the heart rate measurement screen and wait for a moment. The watch will automatically measure and display your heart rate. Please remain relatively still while measuring your heart rate so that the watch can deliver more accurate heart rate data.
Blood oxygen monitoring: Low blood oxygen levels can affect your health. Deeprio Vidaa provides you with the ability to monitor your blood oxygen, simply tap the blood oxygen icon on your watch to automatically start the measurement.

Sleep monitoring: A good night’s sleep is very important for wellbeing. Deeprio Vidaa can record your sleep quality every night, including indicators such as deep sleep duration, light sleep duration, and awake duration. Please note that this function needs to be manually enabled in the Deeprio app in order to be used.
Note: Heart rate, blood oxygen, and sleep monitoring data are for reference only and should not be used as a basis for medical diagnosis.

Notification functions
Deeprio Vidaa can provide various notifications i.e. for messages, incoming calls, and alarms.
You can also set up sedentary reminders to remind you to move during the day. After you turn on the corresponding reminder functions in the Deeprio app, the watch will stay connected with your phone and vibrate to remind you when there is an incoming call or a new message to ensure you won’t miss any important information.
Other functions
Deeprio Vidaa also offers features like weather reports, audio controls, a stopwatch, flashlight, find-my-phone service, and much more – it is all waiting for you to explore and discover.

Electrical parameters

Product name| Deeprio Vidda Smart Watch| Screen| 1.52″ Colored screen
---|---|---|---
Model| TGW101| Battery life| 7-9 days
Frequency band of operation| 2402-2480MHz| Waterproof rating| IP68
Working temperature range| -10 C — 55 C| Battery capacity| 180mAh
Bluetooth transmit power| 0 dBm| Charging duration| About 2 hours

• Do not place the device or its accessories where the temperature is too high or too low, as this may cause malfunction, fire, or explosion.
• Protect the product from impacts or vibrations that may damage the device or cause malfunction.
• Do not disassemble or modify the device or its accessories without permission, and call our after-sales support service in case of any malfunction.

FAQ

The phone can’t connect to the watch

1. Update the Deeprio app to the latest version.
2. Close all apps on the phone, restart the Bluetooth, and try connecting again.
3. Verify that the operating system of the phone is Android 6.0 or iOS 9.0 or above.

No message or call reminder was received by the watch

1. Enable the smart reminder and incoming call reminder functions in the Deeprio app and synchronize the phone to the watch again.
2. Make sure the phone is successfully paired with the watch via Bluetooth.
3. Ensure proper connection of the Bluetooth to the watch is maintained at all times.

The Bluetooth connection fails frequently

1. If the watch and the phone are too far apart from each other the Bluetooth connection will be lost, and if the distance is more than 7 meters, the Bluetooth connection will be compromised significantly.
2. Obstruction between the watch and the phone will affect the connection, and the human body or metal jewelry may interfere with the Bluetooth connection signals.
3. Please make sure that the Bluetooth function of your phone is normal and functional.

Certification

FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Regulatory Information
To view regulatory information, please go to Settings-Regulatory Information

Disclaimer
This product is not a medical device and should not be used as a substitute for professional medical judgment. It is not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of any condition or disease.
Please consult your healthcare provider prior to making any decisions related to your health.

EU Declaration of Conformity (DoC)
Hereby, Deeprio, declares that this device is in compliance with the essential requirements and other relevant of Radio Equipment Directive 2014/53/EU.
The declaration of conformity may be consulted at www.deeprio.com/global/support/eu- declaration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>