Wellis Plastic Flexible Drain S Pipe for Toilet Instruction Manual

June 4, 2024
Wellis

New_Wellis_logo_Black70

Wellis Plastic Flexible Drain S Pipe for Toilet

Note:
This installation instruction is made for the final user. In order to use the product well. please install it correctly.

Block diagram

Step of Installation

The installation way on a tunnel distance 220mm

  1. As the picture: Set the pop-up waste bend pipe 1 on the exculding entrance, and finish the installation of the Screw pole 2 Locating board 3 (suggest saw the screw pole about 130mm shorter). in order to ensure the dimension (kindly please measure on the spot practically).
  2. Attention:the distance between the center of the pop-up waste bend pipe 1 and the floor should be 185mm, and find out the position on the wall with a colour pen.
  3. As the picture: Drill a hole for a diameter of 6, deep 30mm on the mark with the impact driller. Finally, install the expanded rubber nail 7.Wellis-Plastic-Flexible-Drain-S-Pipe-for-Toilet-fig-2
  4. As the picture: Install the screw 8) together with the locating board on the expanded rubber nail D, and tighten the screw 8 with the screwdriver.
  5. Lightly set the W. C Bowl with the popup waste bend pipe from up to down, and put it down slowly.
  6. As the picture: Move forward the W. C Bowl, make much room between the back of the W. C bowl and wall1 for the installation of the Screw pole.Wellis-Plastic-Flexible-Drain-S-Pipe-for-Toilet-fig-3
  7. Install the screw pole according to pictures 8 and picture 9.
  8. Put the A into the proper clip location as the picture, and loose the two nuts , finally complete the connection between the screw pole and the locating board in a vortical way.
  9. In order to fix up the pop-up waste bend pipe D, please tighten the screw with the spanner, and then connect the inlet pipe.
  10. 10. Move the w.C Bowl to the wall slowly as the picture in order to make it close to the pop-up waste bend pipe 0, without any 1eaking.
  11. As the picture, test water after completing the installation to check up whether water leaks out from the bottom of the W. C bowl or not.
  12. Finally, attach the bottom of the W.C bowl and the floor with glass glue.Wellis-Plastic-Flexible-Drain-S-Pipe-for-Toilet-fig-5

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals