EIZO ColorEdge CG210 Color Navigator LCD Monitor User Manual

EIZO ColorEdge CG210 Color Navigator LCD Monitor

Introduction

About ColorNavigator

ColorNavigator is a color management software for graphics monitors. It allows you to easily perform accurate monitor adjustments.

*Please prepare the measurement device and the light booth separately as needed.

1-2. About ColorNavigator License

• For some types of monitors, the ColorNavigator license may need to be purchased and registered to the monitor for use of this software. If the license has not been registered, the software will not start.
• For the purchase of the license, contact your local EIZO representative.

How to Check License Registration

• The license registration status can be checked using the “Monitor Info” screen on the monitor. For details, see the User’s Manual of the monitor.
• If the “ColorNavigator License” in the “Monitor Info” screen is “Not Registered”, the ColorNavigator license must be purchased and registered to the monitor.
• The software can be used without purchasing a license on monitors where the “ColorNavigator License” is not displayed in the “Monitor Info” window.

Features

• Allows you to adjust the ColorEdge series monitor easily.

• Allows you to specify the target values for the brightness, white point, gamma, and black level of the monitor precisely.

• L* is available as the target of gamma.

• Displays the measurement result with a CIE-chromaticity diagram.

• Generates ICC profiles of the monitor or tablet/display device based on the measurement result.

• Manual adjustment function (white point/brightness / black level/gamma / 6 colors)

• Allows you to create an adjustment target based on the paper white or other measurement results.*1

• *1 The function’s availability depends on the measurement device or usage.

• Emulation of Monitor Display (not applicable to some monitor types)

  • Emulation based on the ICC profile
  • Emulation based on the characteristic file (3D-LUT file) of the motion picture film

• *Supports built-in calibration sensor / built-in correction sensor2**

  • Sets the target and schedule for SelfCalibration / SelfCorrection.
  • Correlates the measurement result from the built-in calibration sensor with the measurement results from other measurement devices.

• *2 This function is available for monitors with a built-in calibration sensor / built-in correction sensor only. For details, see “Chapter 13 Making Use of the Built-in Calibration Sensor / Built-in Correction Sensor” (page 86).

• ICC profile validation

  • Validates with RGB / CMYK color patch.
  • Outputs validation results.
  • Reads RGB / CMYK color patch files.

• Switching monitor display
  Switches monitor display based on the monitor adjustment result.

• Supporting monitor adjustment function with a timer setting

• Supporting a multi-monitor environment

• Showing test pattern

• *Adjusting a light booth3*
  3 About the supported models, see “9-6. Adjusting Light Booth” (page 66).

• System-resident function
  Allows you easy access to frequently used functions.

Frequently Asked Questions

What is the EIZO ColorEdge CG210 Color Navigator LCD Monitor?

The EIZO ColorEdge CG210 is a high-quality LCD monitor designed for video professionals and graphic designers. It offers advanced color control and calibration features for accurate color reproduction.

What is ColorNavigator, and how does it relate to the monitor?

ColorNavigator is a color management software specifically designed for EIZO graphics monitors, including the CG210. It enables precise monitor adjustments for accurate color representation.

Do I need a license to use ColorNavigator with the CG210 monitor?

Some monitors may require a ColorNavigator license for the software to function. If your monitor model requires it, you'll need to purchase and register the license through your local EIZO representative.

How can I check the license registration status for ColorNavigator?

You can check the license registration status using the Monitor Info screen on the monitor itself. Refer to the User's Manual for details. If it shows Not Registered, you'll need to purchase and register the ColorNavigator license.

Can I use ColorNavigator without a license on certain monitors?

Yes, ColorNavigator can be used without a license on monitors where the ColorNavigator License is not displayed in the Monitor Info window.

Does ColorNavigator support emulation of monitor display?

Yes, it supports emulation of monitor display based on ICC profiles and characteristic files (3D-LUT files) of motion picture films. However, this feature may not be applicable to all monitor types.

Is there support for built-in calibration and correction sensors?

Yes, ColorNavigator supports monitors with built-in calibration and correction sensors, allowing for precise calibration and correction. Details can be found in the user manual.

What is the purpose of ICC profile validation in ColorNavigator?

ICC profile validation involves validating RGB and CMYK color patches and outputting validation results. It ensures that your monitor is accurately calibrated.

Can ColorNavigator be used in a multi-monitor environment?

Yes, ColorNavigator supports a multi-monitor environment, making it suitable for setups with multiple monitors.

Is the EIZO ColorEdge CG210 suitable for professional color-critical work?

Yes, the CG210 is designed for professionals who require accurate color representation, making it ideal for color correction in video and print graphic design.

Does the CG210 monitor have a USB 2.0 hub?

Yes, it features an integrated 2-port USB 2.0 hub, allowing you to connect USB devices directly to the display via USB 2.0.

What is the viewing angle of the CG210 monitor?

The CG210 offers a wide 170° horizontal and 170° vertical viewing angle, ensuring excellent visibility from various angles.

User Manual

Reference:EIZO ColorEdge CG210 Color Navigator LCD Monitor User Manual- device.report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>