Wellis WF00099 Sophia Floor Mount Bidet Installation Guide
- June 6, 2024
- Wellis
Table of Contents
Sophia floor mount bidet
INSTALLATION MANUAL
Before Installation
- Make sure the wall should be straight.
- Read the instruction to be familiar with the tools, fittings and installation procedures to prevent any unnecessary damage.
- Check the fittings follow the fitting form and check whether there is any damage of the product.
- Because the ceramic is easy to be damaged, please handle it gently and the nut should not be over-tightened.
- Make sure water supply has been turn off.
Tools (not included)
Installation Procedure
-
Put the bidet onto the suitable position, and make the water outlet of bidet aligned with the drainage outlet.
Note: Preposition enough distance for connecting water supply pipe and drain pipe. -
Mark the installing holes on the floor.
-
Remove the bidet carefully and drill holes according to the mark. Insert the expansible plastics or install 7# fixing plastic.
-
Install faucet ,water supply valve and drain units according to the installation instruction for fittings.
-
Put the bidet onto the suitable position, and get the water supply valve and the faucet connected with soft pipe. Then adjust the connecting bar.
Note: Water faucet is not supplied with this product. -
Get the screw aligned with the plastic particle and fix the bidet onto the floor. Then cover the decoration cap.
-
Daub a layer of silicone between the bidet and the floor.
-
Finish the installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>