FLEX VCE 22 M MC V Vacuum Cleaner User Manual

Table of Contents

Specifications

Setup and Preparation

Before using the vacuum cleaner, ensure that all components are properly assembled according to the user manual.
Check that the filter bag is securely in place and the hose is connected correctly.

Powering On and Adjusting Settings

Plug in the vacuum cleaner to a power source and turn it on using the automatic switch or the power tools switch.
Adjust the suction diameter to either 32 mm or 21 mm based on your requirements.

Vacuuming Operations

Start vacuuming by moving the suction nozzle over the desired surface.
Use the flow rate control via the rotary switch to adjust the suction power for different tasks, such as sanding or general cleaning.

Maintenance and Cleaning

Regularly check the filter element and clean it using the manual filter cleaning system to ensure optimal performance.
Empty the tank when full and dispose of the extracted dust properly.

Safety Precautions

Always follow the safety guidelines provided in the user manual.
Avoid vacuuming liquids unless necessary and ensure proper grounding to prevent electric charging of the suction hose.

Frequently Asked Questions (FAQ)

Q: How do I know when to clean the filter element?

A: The vacuum cleaner features a level monitor that indicates when it’s time to clean the filter element.
Additionally, you can visually inspect the filter for dust buildup.

Q: Can I use this vacuum cleaner for wet surfaces?

A: While the vacuum cleaner is equipped with a float valve to prevent malfunctions when drawing in liquids, it is primarily designed for dry vacuuming tasks.
Avoid using it on wet surfaces whenever possible.

Q: What is the purpose of the flow sensor technology?

A: The flow sensor technology monitors the flow rate and alerts you if it drops below the minimum value, ensuring efficient performance during operation

system, 20 l, class M Order no. 530920 GTIN 4030293247604

Handy and compact vacuum cleaner, easy to use and easy to transport
The high-performance turbine ensures both a high suction capacity and a high vacuum.
The outcome is an excellent extraction result
By actuating manual filter cleaning, dust deposited in the filter element is removed by a targeted blast of air
Level monitor, no malfunctions when drawing in liquids thanks to an installed float valve
With appliance socket and electronic automatic switch on/off
Soft start stops any voltage peaks at the start and the run-on feature (5 sec. overrun) empties any remaining dust in the vacuum hose
With accessories magazine for suction nozzles and suction tubes on the back
Equipped with large wheels and two swivel guide rollers
Features a filter bag made of highly tear-proof fleece for optimum filling.
The extracted dust can be disposed of without difficulty
Selector switch suction diameter of 32 mm or 21 mm to adjust the optimum flow rate
The flow rate control via the rotary switch minimizes possible vacuums on the surface during intermediate and finish sanding
Dust-protected antistatic finish prevents electric charging of the suction hose
Class M safety vacuum cleaner, suitable for all clouds of dust with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)
Flow sensor technology monitors the flow rate and emits an audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s

Power consumption	1200 W
Voltage	230 V
Frequency	50/60 Hz
Vacuum cleaner flow rate	3700 m³/h
Max. vacuum	24500 Pa
Tank volume	20 L
Equipment socket	Yes
Automatic switch-on, power tools	Yes
Suction power control	mechanical
Hose length	3.5m
Number of suction motors	1 Cont.
Cable length	7.5 m
Weight	9.5 kg