UNBRANDED LV2 2 Channel 0-1-10V LED Dimming Driver Instructions
- June 8, 2024
- UNBRANDED
Table of Contents
UNBRANDED LV2 2 Channel 0-1-10V LED Dimming Driver
Features
- 2 channel 0/1-10V LED dimming driver, 2 channel PWM constant voltage output.
- For dual color control, the two 0/1-10V input can be set as warm white and cool white respectively, or one for brightness adjust and the other for color temperature adjust.
- 0~100% dimming range via logarithmic characteristic can be very comfortable for human eyes.
- Compatible with active or passive 0-10V, 1-10V dimmer, can solve the fluorescent lamp dimming system compatible with LED lighting.
Technical Parameters
Input and Output
Input voltage| 12-36VDC
Input current| 10.5A
Output voltage| 12-36VDC
Output current| 2CH,5A/CH
Output power| 2 x (60-180)W
Output type| Constant voltage
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Warranty and Protection
Warranty| 5 years
Protection| Reverse Polarity
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD
Dimming data
Input signal| 0/1-10V
Dimming range| 0 -100%
Dimming curve| Logarithmic
PWM Frequency| 2KHz
Mechanical Structures and Installations
Wiring Diagram
Note:
-
The 0/1-10V input is operable via commercially available simple rotary wall switchs designed
for 0/1-10V dimming equipment or from decicated system central dimming controllers. -
Compliant with 0-10V, 1-10V, 10V PWM, RX (4 in 1).
-
We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 50 pieces, The maximum length of the wires from dimmer to LED driver should be no more than 50 meters.
Key function
Press the “SET” key to switch two dimming mode.
-
Set DIM+CCT dimming mode：
Press and hold the “SET” key for 2s, the “RUN” indicator will flash once.
Set DIM dimming input for brightness adjust, CCT dimming input for color temperature adjust (factory setting). -
Set WW+CW dimming mode:
Press and hold the “SET” key for 5s, the “RUN” indicator will flash twice.
Set WW dimming input for WW LED channel brightness adjust, CW dimming input for CW channel brightness adjust.
Dimming Curve
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>