Unbranded 1JAY-70492GF 2-Light Kitchen Farmhouse Ceiling Light Flush Mount Instruction Manual
- October 30, 2023
- UNBRANDED
Table of Contents
Unbranded 1JAY-70492GF 2-Light Kitchen Farmhouse Ceiling Light Flush
Mount
Product Information
The product is a light fixture that requires assembly and installation. The package includes a mounting unit, fixture, rubber rings, mounting screws, wire nuts, and ball nuts. The product requires several tools for assembly, including a ladder, safety glasses, electrical Phillips screwdriver, flat blade screwdriver, pliers, and wire strippers.
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
-
STEP 1
Unscrew the ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box(not included). -
STEP 2
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape. -
STEP 3
Attach the fixture to the mounting unit through screws holes as shown, and secure it with ball nuts. -
STEP 4
Install bulbs (not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>