maxell Airlink Air Conduction Headphones User Manual
- June 9, 2024
- Maxell
Table of Contents
maxell Airlink Air Conduction Headphones
PACKAGE INCLUDES
SUMMARY OF BUTTON FUNCTIONS
- Power On/ Power Off/Volume up/Next song
- Volume down/Previous song
- Magnetic charging port
- LED indicator
- Microphone
- Multifunctional buttons: Pause/ Play/ Answer Phone Call/ End Phone Call/Voice Assistant
Please fully charge the MAXELL AIRLINK before using.
CONTROLS
ON: When the headphone is in power-off state, press and hold power button for
3 seconds with blue LED flickering, Reminding tone: Power ON.
OFF: When the headphone is in power-on state, press and hold power button for
5 seconds with red LED flickering once, Reminding tone: Power OFF.
Connect BT: When the headphone is in the power-off state, press and hold the
power button for 3 seconds to enter a pairing state with red and blue LEDs
blinking, Reminding tone: Pairing.
After the device (smartphone, tablet computer, etc.) discovers MAXELL AIRLINK
press it to connect.
Connected successfully: When the headphone is successfully linked to the
device, blue LED will flicker every 5 seconds with the reminding tone:
Connected
- Pause/Play: In the BT connection music playback state, click the multifunction button to pause, and then click the multifunction button to play.
- Answer/Hang up: In the incoming call state, click the multifunction button to answer, long press the multi-function button for 2 seconds to reject the call. In the call state, click the multifunction button to hang up.
- Vol+: Press the Vol+ once to turn up the volume.
- Vol-: Press the Vol- once to turn down the volume.
- Previous song: long press “V-” for 2 seconds when music is playing.
- For next song: long press “V+” for 2 seconds when music is playing.
- Voice assistant: Keep BT link, and double click the multifunction button to turn on the voice assistant, then double click it again to exit.
- Clear pairing information: Press the power button and the volume off button for 5 seconds to clear the pairing information in shutdown mode, red and blue light will blink for 1 second repeatedly.
Reset: After plugging the charging line, the headphone will be reset and powered off for charging.
Charging: In order to use the charging line to charge, connect the headphone to the USB power. While charging, LED will turn red. After charging, the LED will turn blue.
HOW TO WEAR
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
SPECIFICATIONS
| Music play time | 7 hours(70% volume) |
|---|---|
| Standby time | 20 days |
| Charging time | 2 hours |
| BT version | 5.3 |
| Speaker impedance | 16015% |
| Microphone sensitivity | 42±3db |
| Product weight | 27g±2g |
| Connection distance | 15 meters |
| Charging voltage/current | 5V/0.5A |
ATTENTIONS
- Please wear the speakers of the headphone at your cheekbones in front of your ears and do not put them in your ears.
- Listening to music for an excessive amount of time could make you feel uncomfortable, please try to use a medium volume instead of a high one.
- No matter how high the volume is, please do not allow it to prevent you from hearing the sounds around you. Please take care when using the headphone.
- Do not throw, press the headphone, or put it in the water. The headphone should be kept away from fire, water, and high voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
- If there is any injury or property loss due to violation of the above contents, we will not undertake any liability.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>