Samsara CBL-VG-CAUX Vehical Gateway Installation Guide
- June 9, 2024
- Samsara
Table of Contents
Samsara CBL-VG-CAUX Vehical Gateway
PACKAGE CONTENT
1×
|
1×
---|---
1×
|
1×
INSTALL GUIDE
-
Connect the Samsara cable to the 8-pin port on the Samsara gateway.
-
Reference the table below for input information.
Pin Assignments| Wire Color
---|---
AUX Input 1*| Yellow
AUX Input 2**| Orange
AUX Input 3| Brown
AUX Input 4| Green
AUX Input 5| Purple
AUX Output 1| Blue
Power (5V)| Red
Ground| Black
*Do not use if Samsara Panic Button is installed
**Do not use if Samsara Privacy Button is installed
-
Use a butt splice to connect aux wires to sensor inputs that you want to monitor.
-
For additional installation support, navigate to samsara.com/caux-setup.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>