Haunted Living 5123736 Talking Lighted Jack-o-lantern Tabletop Decoration House Instructions

Haunted Living 5123736 Talking Lighted Jack-o-lantern Tabletop Decoration

House

Important – PLEASE READ

PREPRESS/PRODUCTION NOTE:
Trapping and overprinting must be applied before this electronic file is output to film.

BAR CODES
Physically scan and confirm all bar codes are correct before films and mass printing. Do not simply read the number and assume it is correct. If vou are unsure, please stop and contact #DSG.

CERTIFIED PRINTER REQUIREMENT

Lowe’s Private Brand packaging must be produced by a Lowe’s Certified Printer (unless an official exception is granted) and should not be altered by product vendor or said printer (standard prepress manipulations are allowed). Any necessary content changes must be made by assigned GPR and approved by Lowe’s.

PRODUCT TESTING AND INFORMATION SPECIFICATIONS

Vendors are responsible for the execution and accuracy of their packaging, and are solely responsible for inserting all of the correct legal, certification, warning, warranty, handling and other applic product information. All Lowe’s branded items are required to be tested by an approved third-party test lab. As part of this evaluation, the lab will help determine if additional packaging changes o labelling updates are needed. We recommend that you submit your items for testing as soon as possible. For additional details, please review the Import/Domestic Program Requirements found at https://www.loweslink.com/I|main/enterprise quality assurance.htm

NOTE: If artwork adjustments are required, Lowe’s i for any incurred design, translation or printing costs.

DIELINE PROVIDED BY VENDOR:

As per template (Accordion w/Try Me)

Item #: 5267887
Vendor: SVI
File Name: SVI HL HA 101517 5267887_SP_HT_V3_OLai

• Lowe’s Contact Info: [email protected]
• Program : Illustrator CS6
• PACKAGING TYPE: Hang Tag
• PRINTS: Litho
• VARNISH : Satin AQ

*MINIMUM SUBSTRATE SPEC :* 250 gsm C25
The minimum substrate specification serves as a guide whereby vendors may choose to increase the specification as deemed necessary for the support of the particular product. The substrate specification may not be reduced below the stated minimum.

TEMPLATE : HL_HAU_HT.ai

SIDESTACK SUBSTRATE SPEC:

RANGE JOBS: N/A

COLOR PALETTE I If: BRAND SPOT COLOR*

*This is a custom Lowe’s color, and should match provided color standard. If you do not have a color standard for this color, please contact [email protected]

CLIENT/PRINTER NOTE:
You are responsible for the accuracy of the die responsible for meeting Lowe’s Minimum Structural Specs, Lowe’s Mini Specs. Lowe’s Minimum Printing Requirements. or the appropriate Col. Il other information. Please check artwork before printing. You are also
al packaging. If you do not have a copy of Lowe’s Minimum Structural CONTACT [email protected]

Inks

Wherever possible inks should be vegetable-based.
All inks should be free of hazardous materials and be compliant with US and International Laws pertaining to hazardous metals and substances.

SCALE REFERENCE

DO NOT PRINT
0.75 inch
This is the size of United states Penny

• The nrinter code forma LW000000-MMYYYY

• Please note “MMYYYY” is the time of the production run,
  “MM” is the month in 2 digits, and “YYYY” is the year in 4
  digits. For example: For packages produced in March
  2011. the printer code will be LW000000-032011

• For packages with a barcode, please add the printer code below the barcode, with the same font type and font size as the text on top and beneath the barcode [model number and Iowe’s item number’

• Certified printers should insert their facility specific printer code for each press run.

• Do not share your printer code with any other printers or Lowe’s vendors.

BATTERY REPLACEMENT INSTRUCTIONS

• Requires (3) AA (1.5V) batteries (included).
• You will need a small phillips head screwdriver (sold separately).
• Locate the battery compartment on the product. Remove the battery compartment cover by using a small phillips head screwdriver to unscrew the screw. After removing or installing the batteries, place the battery compartment cover into position, and secure the battery cover. DO NOT overtighten screws.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel cadmium) batteries. Do not mix old and new batteries. Rechargeable batteries to be removed from the product before being charged. Only batteries of the same or equivalent type as recommended are to be used. Rechargeable batteries are only to be charged under adult supervision. Non-rechargeable batteries are not to be recharged. Batteries are to be inserted with the correct polarity.
• Remove batteries if consumed or if product is to be left unused for a long time. The supply terminals are not to be short-circuited. Dispose of batteries safely.
• DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR LEAK.

OPERATION INSTRUCTIONS

• This Interactive Pumpkin Duo has 2 modes:
  • ON/SENSOR: This setting will activate lights and sound onlv when the sensor is triggered. The item will operate for 1 audio cycle with each sensor activation
  • OFF/TRY ME: This setting will activate lights and sound only when the Try Me button is triggered. The item will operate for 1 audio cvcle with each Tr Me activation.
    Remove the Try Me button by disconnecting the wire from the battery box and discard. Try Me button is for in-store DEMO only.

FCC RULES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: This is not a toy. For decorative use only. Remove all tags and plastic loops. Keep away from children.
FOR INDOOR USE ONLY.

HAUNTED LIVING and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
HAUNTED LIVING y el diseño del logotipo son marcas comerciales o marcas registradas de LF, LLC. Todos los derechos reservados.
MADE IN CHINA
HECHO EN CHINA
Distributed by / Distribuido por:
Lowe’s Home Centers LLC 1000 Lowe’s Blvd. Mooresville, NC 28117 888-251-1006

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>