TRIPP LITE N063-008-ENC 8-Port DIN Rail Mounting Keystone Panel Instruction Manual
- June 9, 2024
- Tripp Lite
Table of Contents
TRIPP LITE N063-008-ENC 8-Port DIN Rail Mounting Keystone Panel
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR® surge protector in our monthly drawing! tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA tripplite.com/supportCopyright © 2022 Tripp Lite. All rights reserved.
Installation
- Attach the Box to the DIN rail.
- Finish cable termination on each RJ45 module.
- Use the “LATCH” marking to locate the module direction. Place the assembled RJ45 module onto the back of the panel.
- Snap each RJ45 module onto the panel until all RJ45 modules are installed.
- Use screws to attach the panel with terminated jacks to the box.
- To adjust the modules:
- A Rotate the bezel to the desired direction until you hear a clicking sound.
- B Press the clip onto the bezel to release the bezel and change the direction.
1111 W. 35th Street, Chicago, IL 60609 USA tripplite.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>