HORI NSW-182U Split Pad Pro Nintendo Switch Controller Instruction Manual
- June 9, 2024
- HORI
Table of Contents
HORI NSW-182U Split Pad Pro Nintendo Switch Controller
Instruction Manual
Thank you for purchasing this product. Before using this product please read the instructions carefully. After reading the instruction manual, please keep it for reference.
Before using this product
- Make sure that your Nintendo Switch is updated to the latest system firmvware.
- This product only works in Handheld Mode and must be attached to the Nintendo Switch” console to function. This product cannot be used in TV Mode or Tabletop Mode, or as a wireless controller.
- This product does not support the following features. Gyroscope, Motion IR Camera, Accelerometer, Player LED, HD Rumble HOME Button Notification LED, NFC
- This product cannot be used with certain accessories made specifically for Joy-ConM controllers (such as the Joy-Con Grip and Joy-Con Charging Grip) due to this product’s shape and size. Please do not forcibly install this product into any accessories as malfunction or damage may occur.
Warning
Caution To Parent/Guardian, Please read carefully
- This product contains small parts. Keep away from children under 3 years old.
- Do not use this product if damaged or modified.
- Do not get this product wet. This may cause an electric shockor malfunction.
- Do not place this product near heat sources or leave under direct sunlight. Overheating may cause maifunction.
- Do not apply strong impact or weight on the product.
- Never disassemble, repair or modify this product.
- If the product needs cleaning, Use only a soft dry cloth. Do not use any chemical agents like benzene or thinner.
- Do not use this product for anything other than its intended purpose. We are not responsible any accidents or damages in the event of use other than the I ded purpose.
Included
Platform
Nintendo SwitchTM
Layout
How to Connect
- Slide this product from top to bottom along the rails of the Nintendo Switch T” console until you hear a click.
- Be careful not to move the analog sticks when installing.
How to Remove
Hold the Release Button on the back of the product while sliding product from bottom to the top.
- If the controller is not functioning properly, remove controller from the Nintendo Switch console and reattach it.
- If the analog sticks is not responding correctly, please rotate the analog sticks two or three times in large circles to calibrate. The process above will only work when this product is attached to the Nintendo Switch console and the power supply is on.
- This product is not compatible with the “Calibrate Control Sticks” option in the Nintendo Switch HOME Menu.
How to Use the Turbo Functions
- The Turbo hold function allows continuous rapid fire without having to hold the button.
- (Pressing the assigned button deactivates this).
- The following buttons can be set to Turbo or Turbo hold mode:
Controller(L)
- LButton/ ZL Button/L Stick Button /FL Button Control Pad (UP/DoWN/LEFT/RIGHT)
Controller(R)
- R Button/ ZR ButtonR/R Stick Button/ FR Button A Button/B Button/X Button/Y Button
- Control Pad (UP, DoWN, LEFT or RIGHT) is not compatible with the Turbo hold mode, and can only be used to set Turbo mode.
How to change Turbo Speed
-
You can adjust the Turbo mode to 3 ditferent speeds.
-
Use the lett analog stick to adjust the Controller (L) button turbo speed, ana use tne rignt analog sticK TO dajust The Lonroer (k DuttOn turbo speed.
-
while pressing the Turbo Button, push up on the analog sticks to change the lurbo speed in the following order times/second T times/second 20 times/second
TURBO BOo -
While pressing the Turbo Button, push down on the analog sticks to change the lurbo speed in the following order 20 times/second 10 times/Second 5 times/second
-
Turbo speed is set to 10 times/second by default
-
Analog stCKS must be returned to the neutral position berore chdnging to the next turbo speed.
Assign Mode
You can assign the Controller (L) button function to the FL Button, or assign
the Controller (R) button function to the FR Button. Assignable Button
Functions
FL Button FR Button
L Button/ ZL Button /L Stick Button Control Pad (UP/ DOWN/LEFT/ RIGHT) R
Button/ ZR Button /R Stick Button A Button/B Button /X Button/Y Button
When the software has a button configration option:
- A To assign the Controller (L) button function to the FR Button, set the Controller (R) button (R/ZR/R stick/ A/B/X/Y) to the Controller (L) button (L/ZL/L stick/Control Pad (UP/ DOWN/LEFT/ RIGHT)).
- B To assign the Controller (R) button function to the FL Button, set the Controller (L) button (L/ZL /L stick/ Control Pad (UP / DOWN/LEFT/ RIGHT) to the Controller (R) button (R/ ZR / R stick /A/B/X/Y).
Specifications
- Dimensions (approx) :(W)65mm x (H)110mm x (D)28mm
- Weight (approx) :80g
The normal function of the product may be disturbed by strong electro-magnetic interference. If so, simply reset the product to resume normal operation by following the instruction manual (How to connect). In case the function does not resume, please relocate to an area which does not have electro-magnetic interference to use the product.
PRODUCT DISPOSAL INFORMATION
Where you see this symbol on any of our electrical products or packaging, it
indicates that the relevant electrical product or battery should not be
disposed of as general household waste in Europe. To ensure the correct waste
treatment of the product and battery, please dispose of them in accordance
with any applicable local loaws or requirements for disposal of electrical
equipment or batteries. In so doing9. you will help to conserve natural
resources and improve standards of environmental protection in treatment and
disposal of electrical waste. Applicable to EU countries and Turkey only.
THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced rodio/TV technician for help.
Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall be free of any defects in material and workmanship for a period of 90 days from the original date of purchase. I f the warranty claim cannot be processed through the original retailer please address directly to HORI at Please visit http://stores.horiusa.com/policies/ for warranty details.
Warranty
For all warranty claims made within the first 30 days after purchase, please check with the retailer where the original purchase was made for details. If the warranty claim cannot be processed through the original retailer or for any other inquiries pertaining to our products, please address directly to HORI at infoeu@hori.jp. Please retain contact information for future reference. The image on the package may differ from the actual product. The manufacturer reserves the right to change the product design or specifications without notice. The packaging must be retained since it contains important information. HORI&HORI logo are registered trademarks of HORL Nintendo SwitchTM is a trademark of Nintendo. 2019 Nintendo. Licensed by Nintendo.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>