FRITSCHI Diamir Tecton 13 Alpine Touring Ski Bindings User Manual

FRITSCHI Diamir Tecton 13 Alpine Touring Ski Bindings

Operating instructions

This instruction is to be handed to the customer with the filled-in warranty certificate.

Introduction

Congratulations! With the purchase of a Fritschi Safety Pin System you have a system which is analogous to a modern ski binding with a safety release, sideways at the front and frontal at the back, as well as with an active length adjustment and is therefore available in different triggers defined driving situations. The Safety Pin System is only suitable for ski boots with Pin Tech inserts. In addition, the shoe must according to DIN ISO 9523. The shoe-binding system must be installed by a trained specialist retailer adjusted and checked with the 4-point check. Please read these operating instructions carefully before using them for the first time and keep them these carefully (guarantee certificate).

safety instructions

Skiing and ski touring involves unavoidable dangers and risks for every skier. Her Binding is part of the ski-binding-boot unit. It is not possible to foresee for every situation whether the binding will trigger or not. It does not always and under all circumstances trigger, which can lead to serious injuries with unforeseeable consequences. When you use it no guarantee can be given for the accident safety of the driver. Release bindings reduce the risk of injuries in the lower leg and foot area considerably, but not fully. There is no reducing effect on injuries to other parts of the body. You can influence your safety when skiing yourself:

• Always drive in a controlled manner and choose tours and descents that suit your ability and physical correspond to the constitution. Before the ski tour or before skiing, familiarize yourself with the snow and slope conditions and possible familiar with obstacles.

• Follow the warning signs and instructions in the respective ski area and strictly observe the avalanche and weather warnings.

• Avoid touring or skiing under the influence of medication, alcohol or addictive substances

• For an optimal use of the binding, the assembly, the adjustment to the boot, the DIN setting to the driver, the maintenance and the repair of the ski binding can be carried out by a specialist dealer according to the manufacturer’s instructions. An improper attitude can impair the function of the binding and lead to avoidable injuries. We recommend purchasing the binding from a specialist retailer to be adjusted with a binding tester.

• If you have purchased this binding over the Internet, the binding must be fitted and adjusted professionally by a specialist retailer will. We assume no liability for any self-assembly and adjustments.

• Check your bindings before each use. If parts are missing or damaged, you should refrain from using them.

• Any modification of the binding, any improper use or any use with unsuitable accessories increases the risk of non-release or false release.

• The bindings must be mounted directly (without third-party components) on the skis, so that the ski brakes in particular cannot function properly are impaired.

• The binding must always be used with a suitable ski brake. Failure to do so could cause the ski to slide unchecked down the valley after it has been released and thus pose a danger to life and limb for those around you.

• When driving in deep snow, the braking effect of the ski brakes is not sufficient to avoid losing the ski.

• Worn or damaged shoes can adversely affect the release. Therefore, have your equipment checked out every year check with a specialist dealer.

• The setting range above DIN value 10 is not standardized. Hiring in this area is at your own risk.

• When going downhill, the Easy Switch Toe must be in the SKI position, as the WALK position increases the triggering forces (g risk of injury). Note the warning sticker on the ski.

Care, storage, warranty service

The guarantee provided by Fritschi AG Swiss Bindings assumes that these operating instructions are followed. The binding must be checked by a specialist dealer before each new season and readjusted if necessary. Any repairs must be carried out by a specialist dealer or by the manufacturer. Care Any foreign bodies must be removed. If it is very dirty, we recommend cleaning the binding with a damp cloth or a wash off with a weak jet of water. However, if there is too much water and too much pressure, there is a risk that the fat will be flushed out. the Moving parts and sliding surfaces can be lubricated with a commercially available grease. storage When storing the binding, make sure that the Easy Switch Toe is in the SKI position and that the heel unit is closed.

(Easy Switch Heel to position SKI).
When transporting the skis, the binding should be protected from dirt, salt and other harmful influences to be protected. After touring and/or skiing, the skis should be stored in a dry and warm room. This protects the binding before icing.

Guarantee

The completed guarantee certificate grants the customer a guarantee of 24 months, running from the date of purchase, for any defect arising from is due to a manufacturing or material defect. The guarantee does not apply to rental commitments. The guarantee is only valid if the work carried out, such as assembly, adjustment, adjustment and repairs, has been carried out by a specialist dealer. Damage caused by natural wear and tear, excessive or improper use, external influences such as fire, heat, water, etc., through non-observance of the operating instructions, through improper care or missing or improper maintenance are not considered defects and are excluded from the guarantee. The warranty is processed by the specialist dealer. The defective binding or the defective binding parts are to be returned to the specialist retailer to be handed over together with the guarantee certificate. Fritschi AG Swiss Bindings will decide whether the defective binding will be repaired or replaced. Disclaimer The adjustment of the bindings is based on the ISO 11088 standard for assembly, adjustment and testing of the ski binding functional unit – ski boot.

THEREFORE, THE BINDING ADJUSTMENTS MADE BY THE RETAILER APPLY ONLY TO THE BOOTS FOR WHICH THE ADJUSTMENTS HAVE BEEN

MADE and cannot be transferred to other shoes not adjusted by the specialist retailer. Accordingly, the customer acknowledges and acknowledges that the adjustment made by the retailer only applies to the shoe, for which the binding was adjusted and adjusted. place of jurisdiction Swiss law is applicable to all disputes and the place of jurisdiction is the headquarters of Fritschi AG Swiss Bindings. We reserve the right to make changes. Specifications and designs are subject to change without notice.

Register your security product and increase your warranty from two to three years www.fritschi.swiss

Tecton 13

Color Clip

• included in delivery

Positions Easy Switch

• Step-in
• Calzata

Ski

• Skiing
• Camminata

WALK

• Walking
• Camminata

Operating bindings

• Step-in
• Step-out

Operating bindings

• Switch mode
• Step-in after release

Operating bindings

• Adaption slope angle
• Fixation the crampon

Warranty certificate

• Customer name
• Date of purchase
• Register your Tecton
• Serial numbers of bindings

Annual binding check: The optimum function of the binding and as a consequence also warranty may only be assured if the system has been checked regularly and adapted accordingly. Therefore the binding must be checked and readjusted before each new season by a specialist dealer.

Fritschi AG Swiss Bindings

• ADDRESS: Hauptstrasse 9 CH-3713 Reichenbach
• Fon: +41 (0)33 672 14 15
• Fax: +41 (0)33 672 14 10
• info@fritschi.swiss
• www.fritschi.swiss

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>