VRRP robustel App User Guide

June 4, 2024
robustel

App User Guide
VRRP
Version: 1.0.2
Date: December 25, 2021

Copyright© Guangzhou Robustel Co., Ltd.
All Rights Reserved.

Revision History

Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions.

Release Date App Version Doc Version Details
June 6, 2016 2.0.0 v.1.0.0 First Release
June 29, 2018 2.0.0 v.1.0.1 Revised the company name
December 25, 2021 2.0.0 v.1.0.2 Revised the company name

Deleted the document status: Confidential

Overview

VRRP (Virtual Router Redundancy Protocol) is a fault-tolerant protocol. VRRP protocol can help to constitute a router backup group in a LAN, the VRRP router is equivalent to a virtual router. A host in LAN only needs to know this virtual router’s IP address and doesn’t need to know the IP address of the specific router. When setting the host’s default gateway is the virtual router’s virtual IP address, the host can use the virtual gateway to communicate with the external network. VRRP function is an App that needs to install into the router in the System->App Center unit.

App Installation

2.1 Installation
Path System->App

  1. Please place VRRP App .rpk file (e.g. r2000-vrrp-2.0.0.rpk) into a free disk of PC. And then log in router configuration page; go to System->App as the following screenshot showVRRP robustel App User - VRRP App

  2. Click the “Choose File” button, select VRRP App .rpk file from the PC, then click the “Install” button on the router configuration page.
    VRRP robustel App User - .rpk file from the PC

  3. When the rate of installation progress reaches 100%, the system will pop up a reboot router reminder window. Please click “OK” to make the router reboot.
    VRRP robustel App User - router reboot.

  4. After the router is powered on again, log in to the configuration page, VRRP will be included in App Center’s “Installed Apps” list, and the function configuration will display in the Services part.VRRP robustel App User - .Services par

2.2 Uninstallation
Path:System->App Center

  1. Go to “Installed Apps”, find VRRP App and then click “ X ”.
    VRRP robustel App User - “Installed Apps

  2. Click “OK” in the router reboot reminder popup window. When the router finish restarting, VRRP had been uninstalled.
    VRRP robustel App User - “e router reboot

Parameters Description

VRRP robustel App User - “Installed Apps 1

VRRP

Item| Description| Default
Enable| Click to enable VRRP protocol.| OFF
Interface| Select from “lan0” and “lan1”.| Ian()
Group ID| Specify which VRRP group of this router belongs to.| 1
Priority| Enter the priority value from 1 to 255. The larger value has a higher priority.| 120
Interval| The interval that the master router sends VRRP packets to backup routers.| 5
Virtual IP Address| A virtual IP address is shared among the routers, with one designated as the master router and the others as backups. In case the master fails, the virtual IP address is mapped to a backup router’s IP address. (This backup becomes the master router)| 192.168.0.1

Guangzhou Robustel Co., Ltd.
Add: 501, Building 2, No. 63, Yong’an Avenue,
Huangpu District, Guangzhou, China 510660
Tel: 86-20-82321505
Email: support@robustel.com
Web: www.robustel.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals