robustel Captive Portal Webpage Authentication Setting Application User Guide

robustel Captive Portal Webpage Authentication Setting Application

Revision History

Updates between document versions are cumulative. Therefore, the latest document version contains all updatesmade to previous versions.

Deleted the document status: confidential

Chapter 1 Overview

Captive Portal is a webpage authentication setting. A captive portal is a ‘Landing’ web page, presented by aLayer3brand Layer 2 Operator and shown to users before they gain more-broad access to URL or http-basedInternetservices. Often used to present a Landing or Log-In page, the portal intercepts observed packets until suchtimeasthe user is authorized to launch browser sessions. After being redirected to a web page which mayrequireauthentication, payment, acceptance of EULA/acceptable use policies or other valid credentials that thehost anduser agree to, the user is granted conditional Internet access.
Captive Portal function in router used to authenticate the Wi-Fi access, it is an App which needs toinstall intorouter in System->App Center unit.

Chapter 2 App Installation

Installation

Path： System- >App

1. Please place Captive Portal App .rpk file (e.g. r2000-captive portal-2.0.0.rpk) into a free disk of PC. Andthenlog in router configuration page, go to System- >App as the following screenshot show.
   

2. Click “Choose File” button, select Captive Portal App .rpk file from the PC, then click “Install” buttonofrouter configuration page.
   
   

3. When the rate of installation progress reach 100%, the system will pop up a reboot router reminderwindow. Please click “OK” to make router reboot.
   

4. After router power on again, log in configuration page, Captive Portal will be include in AppCenter’s“Installed Apps” list, and the function configuration will display in Services part.
   

Uninstallation

Path： System- >App Center

1. Go to “Installed Apps”, find Captive Portal App and then click “ ”
   

2. Click “OK” in the router reboot reminder pop up window. When router finish restart, Captive Portal had been uninstalled.
   

Chapter 3 Parameters Description

Captive Portal

Item| Description| Default
Enable| Click to enable Captive Portal function. Captive Portal mainly used for network access authentication.
Note: This function only is available for Wi-Fi function of router.
Before use the function in actual application, please remember to configure router as a Wi-Fi AP.| ON
Primary Radius Server| Enter Primary Radius Server’s IP address.
Radius Server is responsible for receiving and responding Wi-Fi access request from Wi-Fi client under router (Wi-Fi AP).| Null
Secondary Radius Server| Enter Secondary Radius Server’s IP address.| Null
Authentication Port| Enter the Authentication Port which is used to authenticate users’ access.| 1812
Accounting Port| Enter the Accounting Port which is used to authenticate users’ access.| 1813
Radius Share Secret| Enter the Radius Share Secret which used to authenticate the connection between router and Radius Server.| **** Null
Client Network| Set the subnet for router used to assign to Wi-Fi client.| 192.168.137.0
Client Netmask| Set the netmask of Client Network.| 255.255.255.0
Allowed Networks| Enter any website of Wi-Fi client, comma separated. Specific user can access network without authentication.| Null
Allowed Clients| Enter user’s MAC, comma separated. Specific Wi-Fi client can access network without authentication.| Null
Redirect URL| Enter URL, after log in landing page, the webpage switch to URL page automatically.| Null

Guangzhou Robustel Co., Ltd.
Add: 501, Building 2, No. 63, Yong’an Avenue, Huangpu District, Guangzhou, China 510660
Tel: 86-20-82321505
Email: support@robustel.com
Web: www.robustel.com

References

• 4G/LTE/5G/Cellular Routers, Gateways and Modems for Industrial IoT - Robustel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>