robustel EG5120 Industrial Edge Computing Gateway Owner’s Manual
- June 8, 2024
- robustel
Table of Contents
robustel EG5120 Industrial Edge Computing Gateway Owner’s Manual
EG5120
Version: 1.0.0
Date: July 6, 2022
Regulatory and Type Approval Information
RT090_HM_EG5120
RT090_HM_EG5120 2/8
Table 1: Toxic or Hazardous Substances or Elements with Defined Concentration
Limits
Radio Specifications
Simplified EU Declaration of Conformity
We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan
Road, Huangpu District, Guangzhou, China, declare that this radio equipment
complies with all applicable EU directives. The full text of the EU DoC is
available at the following internet address:
www.robustel.com/certifications/
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
IC Declaration of Conformity
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC
This device complies with IC exposure limits set forth for an uncontrolled
environment. This device shall be installed and operated with minimum distance
20cm between the radiator & body.
Related download link
Find more product documents or tools at:
www.robustel.com/en/documentations/
Technical Support
Tel: +86-20-82321505
Email: support@robustel.com
Web: www.robustel.com
Document History
Updates between document versions are cumulative. Therefore, the latest
document version contains all updates made to previous versions.
Overview
EG5120 is a new generation of industrial edge computing gateway, supporting global 5G/4G/3G/2G networks for cellular backhaul, with a fully-fledged Debian 11(bullseye) based operating system able to support thousands of existing or new ARMv8 (Raspberry Pi compatible) based applications.
Package Checklist
Before commencing installation ensure your package has the following components:
Panel Layout(May vary on different models)
Interface Descriptions
1. Serial Ports. Two software configurable serial ports, could be configured as RS232 or RS485.
Note: The external power supply DC voltage range is 5V~30V, 0.1A max.
Hardware Installation
Login to the Device
1. Connect the gateway’s Ethernet port to a PC with a standard Ethernet
cable.
2. Before logging in, manually configure the PC with a static IP address on
the same subnet as the gateway address, click and configure “Use the following
IP address”.
3. To enter the gateway’s web interface, type http://192.168.0.1 into the URL
field of your Internet browser.
4. Use login information shown in the product label when prompted for
authentication.
5. After logging in, the home page of the web interface is displayed, then you can view system information and perform configuration on the device.
6. The automatic APN selection is ON by default, if need to specify your own APN, please go to the menu Interface->Cellular->Advanced Cellular Setting->General Settings to finish the specific setting.
7. For more configuration details please refer to RT104_SM_RobustOS Pro Software Manual. (END) Support
Support: support@robustel.com
Website: www.robustel.com
©2022 Guangzhou Robustel Co., Ltd.
All rights reserved. Subject to change without notice.
Read More About This Manual & Download PDF:
References
- 4G/LTE/5G/Cellular Routers, Gateways and Modems for Industrial IoT - Robustel
- 4G/LTE/5G/Cellular Routers, Gateways and Modems for Industrial IoT - Robustel
- Certifications | Robustel - Industry-leading IoT Solutions Provide