AMHEY F57 Caregiver Pager User Manual
- June 5, 2024
- AMHEY
Table of Contents
AMHEY F57 Caregiver Pager
Product Introduction
Wireless caregiver pager, integrating with 32 songs, adopts advanced wireless transceiver technology, strong microcomputer control system and high-quality voice processing technology with stable and reliable performance. Receivers and transmitters are paired wirelessly by codes. Easy to use (plug and play} plug the receiver into a power outlet. Suitable for villas, apartments, storefronts, hotels, homes, offce buildings, conference rooms and other occasions as a doorbell. The call light reminds people with hearing impairments, especially the elderly, to take care of each other.
Product Structure Diagram
Features:
- 32 available tones
- 4 adjustable volume levels (Including Mute Model)
- Memory function to retain settings when the receiver is unplugged or off.
- Different tones can be set to different transmitters.
Operating instructions
Adjust the Volume:
press the [ (I,) ] repeatedly to cycle through 4 volume settings. (After the
power is cut off, when power is restored, The volume will be automatically
adjusted to maximum)
Select the Tune:
Press the 1 s: Loop tones in sequence and play the current tones. Long press
5s: Change tones loop direction. (Select a tone that you like, wait for 3s
after the ring tone finishes, and press 1 s to select the ring tone.}
Pairing Additional Transmitters/ Accessories:
There are two options in pairing your receivers transmitters/ accessories.
VARIABLE mode and FIXED mode. (Note: Caregiver Pager have been paired and set
to default chime (Ding Dong) before leaving the factory)
VARIABLE Mode
- Plug-in the receiver, pressing and holding the on the receiver for 5s, the receiver will beep once, which means the receiver get into pairing mode.
- Press the push button, the receiver will beep twice with LED indicator 11ashes 1 s.
- Press the push button E … Jain, the receiver will beep once with LED indicator flashes 1 s, which means the pairing is successful.
- Short press [ (I,) I or leave it 20s without any operation, the doorbell will exit the pairing mode.
- Long press 5s
- Press,beep twice; flashes 1 s
- Press, beep twice, Flashes 1 s
- Short press
Adding the additional push buttons or receivers please according to the above steps.
FIXED – Tone Pairing (only play your saved tone}
- Select a tone that you like.
- Pressing and holding the [ Jl I & [ 0 I button for about 5s until the receiver beeps once, which means the receiver get into pairing mode.
- Press the push button once, the receiver will beep twice with LED indicator flashes 1 s.
- Press the push button once again, the receiver will beep once with LED indicator flashes 1 s, which means the pairing is successful.
- Short press I (I,) I or leave it 20s without any operation, the doorbell will exit the pairing mode.
Select music
- Long press 5-7s
- Press,beep twice,flashes 1 s
- Press, beeps twice, flashes 1 s
- Short press
Adding the additional buttons/receivers please according to the above steps.
Note: Pair and set only one transmitter at a time to avoid interference
and ensure successful operation.
Reset (Clearing out Settings)
To return all settings to their default settings Hold down and plug it into an outlet. After playing the beep 10 times, all settings will return to factory defaults. Hold down and plugin.
Replace the battery
Pry the back cover loose along the seam of the button, and slowly remove the battery cover. Push the battery out of the back of the battery slot, put in new batteries, and then close the battery cover.
Technical Parameters
| Product Name | Caregiver Pager |
|---|---|
| Power | 100 240V 50-60HZ AC |
| Working current | 2mA/220AC |
| Radio Frequency | 433.92MHz |
| Transmitterbutton battery | CR2450/3V/580mAh |
| Operation range | 150m |
| Working temperature | -4 F to 140°F |
Safety Warning
- Don’t operate the product with a damaged cord or plug.
- Don’t operate the product if it has been damaged in any way.
- Don’t throw or shake the product.
- Keep the product away from fire or explosion may occur.
- Before using the product, read all instructions.
- The operating range will become shorter and the indicator quickly flashes several times if the batteries in the transmitter is low power. Please try to change the transmitter battery.
- If you encounter problems that cannot be solved, please contact our after-sales team in time.
Warranty:
Our company provides buyers with a warranty period of 1 8 months from the date
of purchase for products damaged due to defects in workmanship and materials.
Proof of purchase is required to obtain warranty service. The warranty is for
replacement only. No service parts are available for these products. Batteries
are not covered under this warranty.
For warranty service, please contact Customer Service. Brand: Arney
Email: Amheyserve@outlook.com
MADE IN CHINA
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>