COUGAR FORTE Microphone Arm User Manual
- June 9, 2024
- Cougar
Table of Contents
COUGAR FORTE Microphone Arm
ASSEMBLY DRAWING
The installation process requires a “cross screwdriver” and “power drill” for hole type which are not included in the package. Please have them prepared while installation.
FEATURES
- Extended Height and Depth for Optimal Mounting
- Omnidirectional Position Adjustment and Ergonomic Knobs
- Long and Sturdy Aluminum Body
- Covers for Hiding Clutter Cable
- 3/8” and 5/8” Universal Screw Mount
- Installation Options : Clip or Hole
- Supported Microphone Weight : Up to 950g
- Supported Desk Thickness : Up to 60mm
ASSEMBLING INSTRUCTION
CLIP TYPE
HOLE TYPE
GLOBAL WARRANTY POLICY
WARRANTY PERIODS OF COUGAR GAMING DEVICES
- Product : COUGAR FORTE MIC ARM
- Warranty : 3 Year
This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary
WARRANTY AGREEMENT
- If the product has defects in material or manufacture, COUGAR will provide product repair and replacement service within the warranty period.
- Our warranty service is based on the dat e of the invoice or warranty card.
CONDITIONS WHERE FREE MAINTENANCE IS NOT PROVIDED
- Any fault or damage caused by natural disasters (including storm, fire, flood, thunder, earthquake, etc).
- Any fault or damage caused by accidental factors and man-made reasons (including hit, scrape, crash, moving, compression, stain, corrosion, riot, misuse, malicious damage, et c).
- Use in an improper operating environment (including high temperature, high humidity, water inflow, etc).
- Inability to provide the product warranty card, purchase receipt or invoice to prove the product is still within the warranty period and the shipping dat e of the product is out of warranty.
- The warranty card has been altered or its number is har d to identify.
- The warranty period has expired.
- Any fault or damage caused by non-compliance with regulations stated on the user manual or impr oper, rough and careless treatment
- Any fault or damage caused by use of parts not certified by COUGAR original manufacturer.
- The problem is caused by improper repair or adjustment by the buyer or any manufacturer without authorization from COUGAR.
- The product is not acquired from an authorized distributor of the company or is acquired from illicit sources.
- Paper carton, instruction and other accessories are not warranted.
DISCLAIMERS
- COUGAR products should not be used as critical components in life support devices.
- COUGAR is not liable for any damage of life and limb or damage or l oss of property caused by or during
- COUGAR products’ use as or with medic al equipment, military equipment, traffic equipment and disaster prevention systems.
- COUGAR’s warranty liability is limited to repair or replacement. The decision on whether t o repair or replace belongs exclusively to COUGAR.
- COUGAR is, to the extent not prohibited by law, not liable for any damages; expenses; lost data, revenues, savings or profits; or any incidental or consequential damages happened while the use of a defective product from COUGAR or due to its use.
LEGAL NOTICES
This manual was created by Compucase Enterprise and may not be completely or par tially copied, passed on, distributed or stored without written consent by Compucase Enterprise. COUGAR® is a r egistered brand of Compucase Enterprise Other product and company names mentioned in this documentation may be brands or trademarks of their respective owners. Compucase Enterprise reserves the right t o make changes concerning the contents of the manual and the technical data of the product without previous announcement
MANUFACTURER CONTACT
Compucase Enterprise Co.,Ltd. No. 225, Lane 54, An Ho Road Sec. 2 Tainan,
Taiwan, R.O.C Tel:+886-6-356-0606
- COUGAR USA Technical Service
- Tel : 833-256-3778
- Mail : rma@compucaseusa.com
- Service email : https://cougargaming.com/support/contact/upload/
Compucase Enterprise Co.,Ltd. All rights r eserved. Made in China
WARNING
- To adjust the Arm height , gently pull the screws. Do not use excessive force to assemble the parts.
- Please wear protective gloves when assembling the Arm. It is y our own responsibility to use appropriate protection to prevent any physical damage.
- Pay attention to your hand’s position and keep it away from spaces in which it could get caught or be injured.
- Do not make fast or violent movements. (when the Arm is in mo vement) do not touch any of the Arm’s adjustment controls to prevent affecting its stability and causing a potentially dangerous fall. (when reclining the chair to its full extent) set the related control level in lock position and keep both feet on the ground, as well as abstain from any violent, rough or strong movement which could cause the chair to tip over.
- Keep in mind that this chair is designed only for sitting and reclining, and that it should be used only for those uses.
- Do not sit on the edge o f the chair or the arm rests.
- Do not place the chair in a location in which it is likely to be subjected to prolongated sunlight exposure. The product’s colors might fade when exposed to sunlight.
- Do not use abrasive products or scrub energetically when cleaning. Please stick to gentle products suitable for delicate materials.
- All parts should be checked monthly to confirm their integrity and to make sure that the screws are not loose.
- If any part of the product is or appears to be damaged, missing or loose, please contact the local distributor and do not use the product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>