SAFRAN STIM320 Inertial Measurement Unit Instructions
- June 9, 2024
- Safran
Table of Contents
SAFRAN STIM320 Inertial Measurement Unit
EVALUATION TOOLS
- PCIe card with communication and power cable
- USB adapter with communication and power cable
- PC software
- User manual
- Measurement data access
- Full device configuration capability
- Data log to file for up to two devices at the same time
PCIe card
|
USB cable
---|---
The STIM series evaluation tools offer easy measurement and configuration access for STIM gyro modules and IMUs. The tools support data sampling at alternative rates, graphical data presentation and data log to file for up to two gyro modules/ IMUs in parallel. RS422 interface for PCIe or USB, necessary cabling and PC software are included in the kits.
STIM EVK PCI
The STIM EVK PCI kit is the preferred solution for thorough device characterizing. The PCI kit contains a PCIe card and a communication & power cable, and supports all device transmission bit rates.
STIM EVK USB
The STIM EVK USB kit with USB connectivity provides an easy setup for a laptop or PC with access to measurement and device configuration. The kit includes a USB to RS422 adapter and a communication & power cable.
Readable parameters
- Part number
- Serial number
- Firmware revision
- Hardware revision
Configurable parameters
- Datagram type/ content
- Sample rate
- Filter bandwidth
- Gyro output unit
- Accelerometer and inclinometer output units (for IMUs only)
- RS422 transmission bit rate
- Line and datagram termination
Diagnostics information
Detailed diagnostics information can be accessed, including RAM and flash checks, stack handling checks, status of internal voltage supply references and various parameter reports for each measurement axis.
Additional information
- The communication and power cable for STIM210 and IMUs has electrical break out pins for External trigger
- Additional communication and power cables, PCIe cards and USB cables are available
- Kits do not include the gyro module or IMU
- Windows 10, XP, Vista and 7 (32/64 bit) supported
- Time of Validity (TOV), external trigger and AUX input functionality are not supported by the evaluation software
STIM GYRO MODULE AND IMU EVALUATION KITS
- SOFTWARE PRINT SCREENS (EXAMPLES ARE SHOWN FOR STIM300-STIM377H EVK)
Information furnished by Safran is believed to be accurate- and reliable.
However, no re-5 Responsibility is assumed by Safran for its use, nor for any
infringement of patents of other rights of third parties that may result from
Its use. Safran reserves the right to make changes without further notice to
any products herein. Safran makes no warranty. representation or guarantee
regarding the suitability of its products for any particular purpose.
nor does Safran assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability,
including without limitation cooseciuential or incidental damages. No license
Is warranted by lmpllcaoon or otherwise under any patent or patent rights of
Safran. Trademarks and registered trademarks are the property of their
respective own81’S, Safran products are not Intended ror any c!PPllcat100 In
which the failure or the Safran product could create a situation where
personal Injury or death may occur. Should 8uyer purchase or use Safran
products for any such unintended or unauthorized application, Buyer shall
indemnity and hold Safran and its offices, employees, sub diaries. affiliates,
and distributors harmless against all claims, costs, damages. and expenses,
and reasonable legal fees arising out of. directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use.
even If such claim alleges that Safran was negligent regarding the design or
manufacture of the part.
Customer Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>