Pekatherm F70 Foot Warmer with Removable Cushion User Manual

: June 9, 2024
: Pekatherm

Table of Contents

Pekatherm F70 Foot Warmer with Removable Cushion
HEATING PADS
SYMBOLS
PRODUCT PARTS
BEFORE USE
INSTRUCTIONS
OPERATING INSTRUCTIONS
SAFETY ELEMENS
ADVICE ON TEMPERATURE SELECTION
TROUBLESHOOTING TABLE
Cleaning
Warranty Conditions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Pekatherm F70 Foot Warmer with Removable Cushion

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. Please contact the customer line if you have any questions or comments about the device.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

HEATING PADS

U – HEATING PADS

U20T / U30T
Universal heating pads / Cloth $Pekatherm-F70-Foot-Warmer-with-Removable- Cushion- $2$$
U20P / U30P
Universal heating pads / PVC

S – HEATING PADS

S20
Neck heating pad / PVC
S30
Lumbar heating pad / PVC $Pekatherm-F70-Foot-Warmer-with-Removable-Cushion- $6$$
S40
Neck, shoulder, and back heating pad / PVC

FOOT WARMER BOOTS

F70
Heated boot with removable heating cushion and unique fast heating system
F55
Heated boot

HEATING UNDER BLANKETS

U110DF / U210DF
Heating underblankets made of cotton, with detachable control unit and special fast heating function. $Pekatherm-F70-Foot-Warmer-with-Removable-Cushion- $12$$
UP110DF / UP210DF
Heating underblankets made of polyester, with detachable control unit and special fast heating function.
UP105D / UP117D / UP205D / UP210D
Heating underblankets made of polyester, with detachable control unit.

SYMBOLS

Please, carefully read the instructions of use
Do not use when folded or creased
Do not stick pins, needles, or any other pointed objects
Never dispose of the product in the rubbish. Take it to a green collection point.

WASHING SYMBOLS

Hand and machine washable, max 30°C
Do not bleach
May be dry cleaned in any type of solvent expect trichloroethylene
Tumble dry at hight setting
Do not iron

These instructions provide information and advice on installation, use and maintenance of the product. Read them carefully before using the product to ensure safe and proper use. Non observance of these instructions can cause persona injuries, as well as product damage or destruction. Keep these instructions and pass them on with the product if sold or lent to others.

PRODUCT PARTS

a. Foot warmer boot
b. Control unit
c. Power cord
d. Tab closure located between the legs
e. Zips for opening the front of the boot
f. Anti-slip sole on the underside
g. User manual
h. Zip for cable output at the back of the boot
i. Removable inner heating cushion
j. Zip for removing the cushion cover
k. Digital temperature and time LED display indicator
l. Autostop time selection button
m. Temperature level section button
n. ON/OFF button

BEFORE USE

After removing the packaging inspect the product carefully to make sure it has no signs of damage caused during transport. In case of any doubt, do not use the product and take it to your dealer or to an authorized service centre.
Before plugging the product in make sure your mains specifications correspond to those of the product stated on the label sewn into the product.
Only use the heating cushion supplied with the product (product reference number shown on the label sewn into the boot.) Do not swap with heating elements from other devices.
This product must not be used with sick or disabled persons, with persons insensitive to heat or persons with restricted physical, sensory or mental capabilities. It also must no be used by children or by people lacking the required experience and knowledge of product operation unless they are properly instructed on how to operate the product safely, or unless the control unit is switched on and set by a responsible person. In all circumstances, while using the product, children should always be supervised by and adult to prevent them from playing with it.
Do not use the product under the effects of alcohol, sleeping pills or sedatives.
Do not use the product on animals.
Do not apply the product to any areas of the body where the skin presents scars, wound, inflammation or any other alteration due to illness. Consult your physician.
This product is designed for home use only. It is not intended for professional applications or medical use in hospitals.
The boot must only be used for warming the feet. Any other use of the product will be considered hazardous. The manufacturer will decline all responsibility for any damage due to improper or incorrect use.
Although electromagnetic field emitted by these products is extremely low, pacemaker users should consult their physician before using the product.
Do not use the product folded or creased. Do not store the product creased.
Do not stick pins, needles, or any other sharp objects into the product.
Do not use the product while wearing shoes.
Avoid using the heating cushion inside or outside the boot without its cover.
Do not place heavy objects on the product.
Never bring the product into contact with other sources of heat, such as other heating pads, underblankets, hot water bottles, etc.
Do not cover the control switch while operating the product, do not place it above or below the heating element or inside the boot while the unit is in operation.
Excessively long use of the product running at a high temperature may produce skin burns. Avoid falling asleep with the product in operation.
Do not leave the product unattended while in operation.
In any case avoid wetting the control unit.
Do not touch the control unit with wet hands while the product is plugged in.
Do not use the product in excessively humid environments or in environments where the risk of splashing liquid on it is high (e.g bathrooms, showers, swimming pools.) In the presence of bottles or glasses with beverages, take care not to splash then on the control unit.
Do not expose the product to environmental agents (rain, sun, etc.)
Unplug the product from the mains when not in use.
Before cleaning the product from the mains when not in use.
Cleaning instructions are found in a specific section of this manual.
Protect the power cord from scraping against edges and from coming into contact with very hot objects that could damage it.
Do not pull on the power cord or use the heating part itself to pull and unplug the product from the mains.
Do not hold the product by the power cord to move or carry it.
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified personnel in order to avoid any hazard.
Inspect the product frequently for signs of wear or damage. If these signs appear, do not use the product, and take it to an authorized service centre.
This product has no parts intended to be repaired or replaced by the user. If any part of the product fail, or the product does not perform properly, or there Is any other kind of anomaly, do not attempt to repair it and instead take the product to an authorized service centre.
The appliance must be returned to the manufacturer or his agent if the fuse of control unit has ruptured.
For any further information, please consult our customer service.

INSTRUCTIONS

F70 FOOT WARMER BOOT
The F70 is modern and attractive newly designed foot warmer combining different materials and technical and design features to create a unique innovative product with truly outstanding performance, setting it apart from other similar products on the market.
Firstly, a double zip on the front of the boot enables it to be fully opened, so feet can be placed inside comfortably and for easy cleaning of the inner part.
Secondly, the inner heating element has been placed inside a soft, comfortable removable cushion, so that it can be used as a heater inside the boor or as a standalone heating device, adding to the product’s potential uses in the home-
Finally, has special design of the F70 heating boot, with its thick layer of thermal insulation between the wearer’s feet and the floor, an its unique magnet closing system between the legs to prevent heat loss, together with is superior heating power and unique fast heating technology – which comes as standard in other PEKATHERM product – greatly enchases the product’s performance and effectiveness, for maximum comfort and wellbeing.

Technical characteristic:

Model F70
Application Feet
Measures 31x31x30cm
Finish Cloth
Power 110W
Fast-heating YES
Maximum temperature 60°C*
Temperature settings 4
Material Polyester
Power supply 230VAC 50Hz

OPERATING INSTRUCTIONS

Insert your feet inside the boot, unzipping the front part the product if necessary.
Close the zip and fasten the boot’s central tab, bringing it between your legs until the magnet inside the tab connects to the rear part of the boot. $Pekatherm-F70-Foot-Warmer-with-Removable-Cushion- $22$$
Plug the product into the mains socket, making sure your main’s specifications correspond to those of the product stated of the label.
If everything is correct, only digital dot remains lit on the digital display indicator on the control unit (heating function is not active yet).
Push the ON/OFF button on the control unit to switch on the product. Digital display indicator shows default temperature setting.
Proceed to adjust the temperature among the four available settings by pushing the temperature button on the control unit. In the same way, adjust your desired AUTO-OFF time by pushing the time button. At this point the product is running and regulating temperature normally. After a few minutes you will be able to perceive warmth. Check that there are no creases or folds.
To switch off the product proceed to push the ON/OFF button again. The heating element remains switched off and only digital dot is lit on the digital display.
To turn the product on push the ON/OFF button once again. Remember to unplug the product from the mains if you do not use it for a considerable period of time.
Unplug the product and let it cool down before storage.

SAFETY ELEMENS

All out products are provided with a multiple safety system:

Digital controlled electronic circuit
The control unit was specifically designed and exhaustively tested to guarantee the highest safety standards.
Thanks to its exclusive high-precision electronic circuit, the control unit maintains the temperature of the heating element constant, as well as ensures the correct operation of the product. If a flaw such as excessive temperature is detected, the control unit will immediately switch off the heating element. If this happens, all the LED indicators of the control unit will start flashing simultaneously. In this case, unplug the product from the mains and take it to an authorized service centre.
Safety AUTO-OFF
To maximize safety when using the product, an additional safety switch of function has been incorporated into every control unit. This function sets a maximum period of time for which the product can operate continuously. The period is set for 2 hours for the footwarmer. When these periods have elapsed, the product will switch off automatically. This reduces the risk to the user of spending too much time in contact with heating element, as well as the risk of leaving the product in operation unnecessarily. When the safety AUTO-OFF function is activated, the heating element is switched off. To restart the product, push the control unit ON/OFF button.
Safety heating elements
The heating elements of all our products use double-wounded wiring with an integrated internal sensor element. They boast an especial technology that prevents hot spots and makes impossible the overheating of the element. If, through a product failure or improper use, the product reaches or exceeds a predetermined threshold value, the heating element will be automatically switched off, this avoiding the risk of skin burns or fire.

ADVICE ON TEMPERATURE SELECTION

Excessive heat continuously applied to the skin may produce skin burns. The maximum temperatures our products can ever reach are those permitted by the current regulations. The product reach temperatures between 55°C and 65°C. (Note: all measures were collected in laboratory conditions with products totally covered, according to procedures described in the EW60335-2-8 l Standard). It usually takes 30 to 45 minutes for the product to reach the maximum temperature. The products provided with fast heating function reduce this time to between 10 and 15 minutes. You can set the control unit at the maximum level to obtain a faster warm up. Remember, however, that you should not use this setting continuously for more than one hour. After that time, we recommend that you lower the temperature gradually. Regardless, thanks to the safety AUTO-OFF option, it will also turn the product off after 2h of continuous running. Therapeutic benefits provided by these products have little to do with high temperatures and are based on a consistent, controlled low-level heat. If, after a considerable period of time, the product stops warming and gets cool, it may be due to the activation of the safety AUTO-OFF, in order to protect you from having excess heat applied to your skin.

PEKATHERM TECHNOLOGY
This product family is specially designed to ensure a smooth low-level heat which, apart from comfort, provides recognised pain-relieving effects, since it dilates the blood vessels and enables muscular distension. The control unit was designed and developed together with the heating elements to assure the best performance. At the start, when the circuit is switched on, the control unit carries out an initial check recognizing the heating element and then proceeds to scan and store technical data which enables it to optimize performance and assure the best operating conditions. The control unit is provided with high technology electronic circuitry, able to continuously control and regulate the temperature of the heating element. It is also able to detect increases and decreases in ambient temperature and compensate for them, this ensuring that the temperature of the heating element is constant. It means that the product will always reach the same temperature, regardless of ambient and use conditions.
All our products have increased power to ensure a faster heating. During the first few minutes of operation full power is applied to reach a selected temperature and once obtained, the power application drops drastically to ensure low consumption.

TROUBLESHOOTING TABLE

When the product is plugged in, the digital display indicator does not light.
Check whether your mains socket has power, check whether the product is plugged in correctly. Unplug the product and wait a few seconds, then plug it in again. Push the ON/OFF button on the control unit.
After pushing the ON/OFF button on the control unit, the control unit fails to set at the default temperature level, and the product does not warm up.
The control unit may have found an error at the start and blocks the product operation for safety. Check if the digital display indicator has any special flashing.
Unplug the product from the mains, wait a few seconds and plug it again. If the problem persists, take the product to an authorized service centre.
The product does not warm up.
Make sure the product is powered, by checking whether the digital display indicator on the control unit is lit. Make sure the product is operating, by checking whether the digital display indicator on the control unit is set at any temperature level. Remember that the safety AUTO-OFF function may have switched the product off if the safety time period is over. If that’s the case, push the ON/OFF button to switch the product on. In case of any doubt, reset the product by unplugging it from the mains and plugging it in after a few seconds.
After a period of proper functioning, the digital display indicator go off, only digital dot remains lit on the digital display indicator, and the product stops warming.
In order to ensure safety in use, all our products are provided with a safety AUTO-OFF option which switches the product off after a certain number of hours of continuous operation. The period is 2 hours for footwarmers. See SAFTEY ELEMENTS paragraph for details. If you want to turn on the product, just push the ON/OFF button on the controller.
The control unit appears to malfunction: the digital display indicator flash continuously or shows strange symbols.
The control unit may have found a problem and blocks the product operation for safety. Unplug the product from the mains, wait a few seconds and plug it in again. If the problem persists, take the product to an authorized service centre.

Cleaning

Before cleaning the product, always remember to unplug it from the mains. The body fabric of the boot and the fabric cover of the heating cushion are washable with water, by hand or in a washing machine, provided the heating element inside the cushion and temperature control switch have first been removed. Follow the washing instructions indicated on the label sewn into the product. If washing the boot and cushion cover in a machine a protective washing bag is recommended. Do not bleach. Do not iron. Alternatively, small stains can be removed by hand using a soft brush. The boot and the cushion cover can also be washed by hand using a damp cloth or sponge and then dried with a dry cloth. If needed it can be washed by hand with soap, using liquid soap or dry foam and a cloth or sponge. Apply the foam evenly to the fabric surface and brush.
The control switch and heating element in the pad cannot be washed with water or dry-cleaned. Avoid all contact with water, including splashes of water on the control switch. If the heating element gets wet, do not connect it to the mains and avoid wringing or twisting it, do not tumble dry, or try to dry it by ironing it or switching it on. Place it on a clothesline horizontally or vertically without bending and wait until dry. The control switch should be positioned on the clothesline so that the water draining off it cannot penetrate inside it. Do not use the product again until it is fully dry.

Storage
Let the product cool down before storing it. Avoid excessive folds or creates. Store it in a cool dry place. Do not place any heavy objects on the product.
Inspect the product (the control unit, the heating elements, and the power cord) frequently for signs of wear, damage, or misuse. If these signs appear, do not use the product. Remember this product has no parts intended to be repaired or replaced by the user. Do not try to carry out repairs and instead, take the product to an authorized service centre. Repairs may only be carried out by our after sales service or at an authorized service centre. Improper repair may cause considerable danger to the user. In the event of any doubt, please contact our customer service.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.