Char-Broil 463731503 Gas Grill Installation Guide
- July 31, 2024
- Char-Broil
Table of Contents
Char-Broil 463731503 Gas Grill
Product Specifications
- Model: Charbroil 463731503
- Parts Included: Leg Assembly, Front Panel, Side Support Brace, Carriage Bolts, Tee Knobs, Grill Lid, Handle Assembly, Metal Wing Nut, Hinge Pin, Hitch Pin, Logo Plate
Product Usage Instructions
Assembly of Leg Assembly, Front Panel, and Side Support Brace
- Lay leg assemblies on their sides.
- Place front panel on legs.
- Attach braces to the inside of legs.
- Secure with carriage bolts and tee knobs.
- Leave tee knobs loose on the right side.
Assembly of Cart and Grill Bottom
- Stand cart upright.
- Ensure the ignitor wire is connected to the ignitor.
- Place grill bottom onto supports with the control panel overlapping the front panel.
- Secure with carriage bolts and wing nuts.
Assembly of Grill Lid and Handle Assembly
- Attach the lid to the grill bottom with hinge and hitch pins.
- Attach the handle assembly to the lid with two metal wing nuts.
- Snap the logo plate into the grill lid.
FAQs
- Q: How do I prevent scratching during assembly?
- A: To prevent scratching, lay the grill on packing material while assembling.
- Q: What should I do if the parts do not fit together properly?
- A: Double-check that you have followed the assembly instructions correctly. If issues persist, contact customer support for assistance.
This Owner’s Manual is provided and hosted by Appliance Factory Parts.
Charbroil 463731503 Owner’s Manual
Shop genuine replacement parts for Charbroil 463731503
Find Your Charbroil Grill Parts – Select From 3592 Models ——– Manual continues
below ——–
1
Parts to assemble: 2 Leg Assembly 1 Front Panel 1 Side Support Brace 4 Carriage Bolt, 2″ 4 Plastic Tee Knob
A. Lay leg assemblies on their sides. B. Place front panel on legs. C. Braces
attach to inside of legs. D. Secure with carriage bolts and tee knobs.
NOTE: Leave tee knobs loose on right side.
Front Panel
Leg Assembly
Leave these loose.
Qty. 4 Qty. 4
Side Support Brace (Fits inside legs.)
NOTE: To prevent scratching, lay grill on packing material to assemble.
4
Parts to assemble: 1 Grill Bottom Assembly 4 Carriage Bolt, 1¼” 4 Metal Wing
Nut
A. Stand cart upright. B. Make sure ignitor wire is connected
to ignitor. C. Place grill bottom onto supports. Control
panel overlaps front panel. D. Secure with carriage bolts and wing nuts.
Ignitor Wire
Qty. 4
Grill Bottom
Control Panel Cut plastic band to release hose and regulator.
Qty. 4
7
Parts to assemble: 1 Grill Lid 1 Handle Assembly 2 Metal Wing Nut 2 Hinge Pin
2 Hitch Pin 1 Logo Plate
A. Attach lid to grill bottom with hinge and hitch pins.
B. Attach handle assembly to lid with two metal wing nuts.
C. Snap logo plate into grill lid.
Handle Assembly
Grill Lid
(Lid style may vary.)
References
- Repair Your Grill: Shop Replacement Parts for 24,880 Models
- Charbroil Grill Parts - Select From 3620 Models
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>