tp-link tapo Smart Hub with Alarm User Guide
- June 9, 2024
- tp-link
Table of Contents
tp-link tapo Smart Hub with Alarm
Meet Your Tapo Hub
Tapo is the easy way to turn your home into a smart home. At the center of it
all is the Tapo Hub.
With superior ultra-low-power performance, Tapo Hub connects wirelessly with a
wide range of Tapo accessories. So you can easily control and monitor your
home from anywhere.
LED Status
Solid blue
Starting up
Blinking orange
Connecting to Wi-Fi
Blinking blue slowly
Pairing with Tapo accessory
Blinking orange and blue
Ready for setup
Solid blue
Connected to Wi-Fi
Solid orange
Offline
SYNC Button
Download Tapo App
| 
| 
---|---|---
Set Up Your Tapo Hub
Tap the button in the app and select Hubs. Follow the in-app instructions to complete setup.
Add Tapo Accessories
After the Tapo hub is successfully added, connect your Tapo devices to your hub.
Support
For technical support, the user guide, FAQs, warranty and more, please visithttps://www.tapo.com/support/
Safety Information Do not install in a socket facing downward. Keep the device
away from water, fire, humidity or hot environments. Do not attempt to
disassemble, repair, or modify the device. If you need service, please contact
us. Do not use the device where wireless devices are not allowed. The socket-
outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU declaration of
conformity may be found at https://www.tapo.com/en/support/ce/
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017. The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
For EU/UK Region:
Operating Frequency / Nominal Operating Frequency / Max Output Power:
2400MHz~2483.5MHz / 20dBm
863~865MHz / 863.35MHz / 25mW (e.r.p)
863~865MHz / 864.35MHz / 25mW (e.r.p)868~868.6MHz / 868.35MHz / 25mW (e.r.p)
©2022 TP-Link
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>