iHOME iBTW22 Timebase Wireless Charging + Speaker Instruction Manual

iHOME iBTW22 Timebase Wireless Charging + Speaker Instruction Manual

Overview

WIRELESS CHARGING PAD

POWER
Press to turn ON/OFF
SET –
Press to decrease settings
SET +
Press to increase settings
SNOOZE/DIMMER
Press to snooze an alarm
Press to adjust display brightness
AUTO DIMMING SENSOR
SPEAKERPHONE
Press to answer a call
Press & hold to end/reject a call
When connected to a BT device, press to make voice commands
PLAY/PAUSE
Press to play/pause audio
ALARM
Press to Preview
Press Again to Arm/Disarm
Press & Hold to Set Alarm (adjust with +/- and press alarm to confirm)

REAR PANEL

BLUETOOTH PAIRING

• Press & hold to enter Bluetooth pairing mode
• Select ‘iHome TimeBase’ on your device to connect
• To cancel pairing, press Bluetooth button again

TIME SET

1. Press & Hold to Set Time
2. Release Time Set Button when display is flashing
3. Adjust time using + / – and press Time Set to confirm
4. Repeat Step 3 to set year, month, and date

BOTTOM PANEL

BACKUP BATTERY COMPARTMENT

for clock accuracy and alarm setting backup When Low Backup Battery icon appears on the display, install a new CR2450 battery

DST SWITCH

By default, the DST Switch is set to Auto and will automatically adjust the time in March/November

DISPLAY ICONS

WIRELESS CHARGING

Supports:

• Qi compatible phones (also works with plastic cases up to 3mm thick*)
• Apple Air Pods

Place Qi compatible device facing upward on the charging rest. Charging status will be indicated on the LED located under the iHome badge:

Rapid blinking icon: Device is not charging (reposition device)
Slow blinking icon: Device is charging
Solid icon: Device is fully charged

Note: Qi status LED may continue to blink slowly (indicating charging) for iOS devices that are fully charged.
CAUTION: Not all cases are wireless charging compatible. Remove phone’s metal protective case before charging. Do not place magnetic or metal objects on charger during charging.

Some larger size phone cases may not be able to charge. Please remove case to charge phone properly.)

  WARNING

• Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• The mains plug of power adaptor is used as the disconnect device, it shall remain readily operable.
• CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE O USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

IMPORTANT SAFETY INSTRUCTIONS

Please heed all warnings, read and follow all instructions and keepthese instructions handy for future reference.

1. Do not use this product near water.

2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit.

3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

5. Only use attachments/accessories specified by the manufacturer.

6. Unplug this product during lightning storms or when unused for long periods of time.

7. Damage Requiring Service

   • This product should be serviced by qualified service personnel when:
   • Plug has been damaged.
   • Objects have fallen into or liquid has been spilled into the enclosure.
   • The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
   • The unit exhibits a marked change in performance or does not operate normally.

8. No naked flame sources, such as lighted candles, should be placed on this product.

9. Attention should be drawn to the environmental aspects of battery disposal. Many electronics retailers now recycle
   batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com

10. This product is suitable for use in tropical and/or moderate climates.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
• Do not dispose of batteries in the household trash or fire.

FCC Information

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISED Information

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>