UNiKA PMX-8006 Instrumental Series Powered Mixer Instruction Manual
- June 5, 2024
- UNiKA
Table of Contents
INSTRUCTION MANUAL
PMX-8006 POWERED MIXER
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
CAUTION: Risk of the electrical shock – DO NOT OPEN!
CAUTION: To reduce the risk of electrical shock, do not remove the cover.
No user-serviceable parts inside. Refer all servicing to qualified service
personnel.
This symbol is intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the product.
WARNING: To prevent electrical shock or fire hazards, do not expose this
powered mixer to rain or moisture. Before using this powered mixer read the
user manual for further warnings.
Important Precautions
- To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
- Do not spill water or other liquids into or onto your unit.
- Do not attempt to operate this unit if the power cord has been frayed or broken.
- Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.
- Disconnect the main power before making any type of connection.
- Do not remove the cover under any conditions. There are no user-serviceable parts inside.
- Never plug this unit into a dimmer pack.
- Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
- Do not attempt to operate this unit, if it becomes damaged.
- This unit is intended for indoor use only, use of this product outdoors voids all warranties.
- During long periods of non-use, disconnect the unit’s main power.
- Always mount this unit in a safe and stable manner.
- Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.
- Cleaning -The outside of the unit should be wiped down with a soft cloth and mild cleaner when needed.
- Heat -The powered mixer should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including powered mixers) that produce heat.
- The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibit a marked change in performance.
Introduction
Congratulations and thank you for purchasing an UNiKA Instrumental series-
powered mixer. This powered mixer is a representation of PMX’s continuing
commitment to producing the best and highest quality audio products at an
affordable price. This powered mixer is designed to provide a big impact on
sound reproduction. Please read and understand this manual completely before
attempting to operate your new powered mixer. This booklet contains important
information concerning the proper and safe operation of your new powered
mixer.
Unpacking: Every PMX series-powered mixer has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the shipping
carton for damage
that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your unit for any damage and be sure all accessories
necessary to operate the system have arrived intact. In the event, that damage
has been found or parts are missing, please contact us for further
instructions. Please do not return the powered mixer to your dealer without
contacting customer support.
Installation: This powered mixer is designed to mount into a standard 19”
rack. The front panel provides four holes used to screw the unit into a rack.
The unit also provides a way to rear mount the unit into a rack for added
security. Rear mounting of the unit is especially recommended if the unit is
to mount into a mobile rack.
FRONT PANEL
1. Power Switch
2. AV Selector
3. Monitor Gain Control
4. Master Gain Control
5. Master Balance
6. Music Gain Control| 7. Music Treble Control
8. Music Bass Control
9. Mic Echo Level Control
10. Mic Echo Repeat Control
11. Mic Echo Delay Control
12. XLR Mic Input
---|---
REAR PANEL
1. TRS Mic Input
2. Fan
3. AC Power Cord
4. Speakon Connector For Output
5. Effect
6. Master Out
7. Monitor Out| 8. Breaker
9. AV Input
10. Master Output
11. REC Output
12. Echo Hi / Cut Switch
13. Stereo / Mono Mode Switch
14. Phantom Switch
---|---
SPECIFICATIONS
Output Power :| 650W@2Ohm Stereo
450W@4Ohm Stereo
280W@8Ohm Stereo
---|---
Bridge Mode :| 1290W@4Ohm Mono
900W@8Ohm Mono
8 Mic Input –| Balanced (6 XLR + 2 TRS)
-
6 Mic Level / Treble / Bass Control
-
6 Echo On / Off Switch With LED Indicator
-
Mic Echo Control Function: Level / Repeat / Delay
Music Control Function:| Gain / Treble / Bass Master / Balance / Monitor
3 AV Input Selector| (Av1 / Av2 / Av3) & 1 AV Output
Effect Function:| Send / Return
-
Master / Monitor Pre Output, REC Output
-
Phantom Power Switch With LED Indicator
-
Echo Hi / Cut Switch
-
2 Fan 2 speed
6F, No.168, Xinhu 2nd Rd,
Neihu District, Taipei City 114,
Taiwan (R.O.C.).
Email :unika@unika.com.tw
Unlike Electronic Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>